Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

Best grain filler

Posts

Best grain filler

#1

Best grain filler

Chris K in MD

>I has one heck of a time filling the pores on a peice with wenge. I have been using CA glue to fill them in but it doesnt always work. I am on the 6th coat in some cases. The face grain ones are not as difficult I have sealed them with 3-4 coats, its the end grain ones that are killing me.

Is there a better solution out there?

Re: Best grain filler

#2

JL

Re: Best grain filler

JL

>Sawdust slurry with CA as carrier has worked for me in some cases. It doesn't work well with pieces you are staining (DAMHIKT). I have filled with epoxy and sawdust also. On flatwork, I have filled with pumice or rottenstone and oil. I have also filled with sawdust and finish on flatwork. I have not tried the last two with lathe work though.

Re: Best grain filler

#3

Re: Best grain filler

Bill Howatt

>Haven't tried it but I saw somewhere that Plaster of Paris works great - apparently goes transparent when finish applied.

Bill

Re: Best grain filler

#4

Re: Best grain filler

RevDoug

>I think I'd have to see it to believe it.

Turn 'em round,

Re: Best grain filler

#5

Re: Best grain filler

GaryG in MD

>Chris,

Certainly not for all applications, but you might want to consider shoe polish for some situations. John Lucas talked about this recently. You can use clear or colored.

See www.woodcentral.com/cgi-bin/turning.pl?noframes;read=95744

and

www.woodcentral.com/cgi-bin/archives_turning.pl?read=84311

You can get a lot of hits on "shoe polish" in the WC Turning Archive

Let us know how it turns out,

Gary

Re: Best grain filler

#6

Re: Best grain filler

Bill Howatt

>See Fine WoodWorking issue #177. Article by Jeff Jewitt on using pumice or plaster of paris. This wasn't the info I had seen, it was somebody who had tried it and thought it was great.

Bill