Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

Burl prep *LINK*

Posts

Burl prep *LINK*

#1

Burl prep *LINK*

craneman54

>I spent most of the day today finding just the right way to cut up some Burls I got yesterday.These are Oak burls and they way a ton.I had to use an engine lift to get them in my truck.

The president of my turners club(Ed Castelin from the Bayou Wood Turners)helped me cut them up so I gave him 2 20" pieces and a few smaller ones.

Now for the questions.

Can burls be turned green with a good rate of success?

What would you suggest as a way of drying these burls?

Here are some pics of the burls I managed to save.By the time I found out about them the tree cutters had hauled away more than twice what I have in my truck.

Thanks for the help in advance.


http://http://www.woodworkersweb.com/modules.php?set_albumName=albvb64&id=OAk_Burl_3&op=modload&name=gallery&file=index&include=view_photo.php

Re: Burl prep *LINK*

#2

Re: Burl prep

Pat Mulligan

>I've been working on some oak burl lately and I find it is prone to cracking while drying.I've been using the alcohol soak on them-haven't tried boiling.The wood is real nice looking though,probably worth the extra work.

Re: Burl prep *LINK*

#3

LINK CORRECTED *LINK*

Don Evans

>corrected link:

http://www.woodworkersweb.com/modules.php?set_albumName=albvb64&id=OAk_Burl_3&op=modload&name=gallery&file=index&include=view_photo.php

Don


CORRECTED LINK

Re: Burl prep *LINK*

#4

Re: LINK CORRECTED

craneman54

>Thanks Don.I did'nt know the link did'nt work and when I found out I tried to edit it,but I can't find an edit button.

Re: Burl prep *LINK*

#5

Re: Burl prep

JKJ in East TN

>I made pen blanks from beautiful spalted oak burl and they distorted a great deal upon drying, some so much they were unusable. I soaked 1/2 of them in alcohol for several days and let the other half air dry, and they both reacted the same. Since these pieces were not bowl shaped, the recommended procedure of taping paper on the outside for differential stress tensioning did not apply so I simply stacked them with air space between for drying.

They didn't crack much, probably since the pieces were so small they just warped instead of cracking - larger pieces in my scrap pile cracked a lot.

I also turned several test pieces of the same oak burl both green and partially dried and they warped a LOT as they dried. Reading of the trouble many people report in drying oak boards in the sawmill and drying forums, I suspect that is just the way oak behaves, especially oak without very straight grain. (This is probably due to the fibers in the large rays in oak which inhibit radial shrinkage more than many other woods.) I did read some older articles reporting good success in treating burls with PEG, but that has its own disadvantages and doesn't seem to be used much these days.

BTW, all my experience was with a type of red oak with the burl taken from the base of the tree. I'm sure the drying behavior will vary widely with different types of oak and different types of burl.

JKJ

Re: Burl prep *LINK*

#6

Re: Burl prep

craneman54

>Thanks for the input Gentlemen.

I guess I will just wrap them in paper and see what happens.

Might soak a few smaller ones in DNA also just to see what happens.