Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

Dumb day

Posts

Dumb day

#1

Dumb day

John Lucas

>I'm having one of the those days when you do dumb things. I've managed to turn a really nice ornament and a box elder box. During the process I stuck my skew into the chuck. No I wasn't even turning. I had stopped to look at what I had done and let the point hit the chuck. It wasn't one of those dull the tip hits, it took a chunk off. Oh well I needed to clean up the bevels and reshape the edge on that tool anyway.

Then I sharpened my little 3/8" spindle gouge and I was walking back over to the lathe I stuck the point into the side of the lathe. On the plus side I'm getting some good sharpening practice for my sharpening demo on Wednesday.

I loaned out my camera so you will have to wait to see photos of the work.

Re: Dumb day

#2

Re: Dumb day

Gerry Meekins in Maryland

>John,

Look on the bright side, no blood has been shed!

Happy Grinding!

Gerry

Re: Dumb day

#3

Re: Dumb day

Barry Turner

>Do we get to see photos of your skew chisel with the chunk missing? How about the damaged 3/8" spindle gouge?

Re: Dumb day

#4

Re: Dumb day

JKJ in East TN

>Yikes. I dropped my 1/2" skew point down on a concrete floor once. Good reason to put wood floors in the new shop!

JKJ

Re: Dumb day

#5

Re: Dumb day

Jennifer@Indy.USA

>John, we don't want to see the work....we want to see your tool tips!

....couldn't resist :)

I had a short but productive day in my shop....felt good to be out there again...ran out of kerosene for the heater though...only to find it was $3.80 a gal at the pump! Come on spring!

Jen

Re: Dumb day

#6

Re: Dumb day

Jennifer@Indy.USA

>...and I thought I was the only evil one!

;)

Re: Dumb day

#7

Re: Dumb day

John Lucas

>Jen I'm having the same problem. Kerosene is killing me. I'm buying a central heat and air unit but it will be next winter before I can install it if then. I have to build an addition to my shop to hold it and a few other things. I'm kind of afraid of the cost of running it but surely it won't be any worse than Kerosene. The difference is if I don't have money I don't buy kerosene. I'm afraid I might run my electricity like a credit card and spend beyond my means. On the plus side I might be in the shop more making more stuff which means more money if I manage to sell it all. I just checked and once again I didn't win the lottery. Bummer.

Re: Dumb day

#8

Re: Dumb day

Jennifer@Indy.USA

>I'm just putting on an extra sweatshirt tomorrow....I refuse to pay $3.80 a gallon.

Re: Dumb day

#9

Me too~! 4 stitches..

Bob Slocum

>Sanding the inside of an ash bowl with an electric drill and 2" sanding pad. Some bouncing inside, and somehow my thumb ends up pressed against the spinning bowl edge. I'm always aware of how sharp this edge is and had already broke it with 150 grit. Didn't matter. Nice little gash. Only 3 hours in the ER! Once they bite me, I have to put the bowl down.... Into the woodstove with this one!

Re: Dumb day

#10

Holy smoke!

Carole Valentine

>It's $2.64 here. I just filled my jug tonight and I thought that was bad!

Re: Dumb day

#11

Re: Dumb day

Jim Shaver - Oakville, Ontario

>Hi Jen,

At that price is vodka cheaper?

I have a small 4800 watt heater....it runs for a short while before I get out there...in the off season al I do is turn pens...but come spring I'm back to teh furniture...

Take care,

Jim