Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

Need information on Turning a Pet Urn

Posts

Need information on Turning a Pet Urn

#1

Need information on Turning a Pet Urn

David Lykins - Marietta GA - guitardude

>A couple of days ago my roomate's Border Collie got hit and killed by a car. She had had the dog for over twelve years and he had gone with here everywhere, he was her best friend. All of us in the house have been pretty devistaded with the loss of such a great pet. She had the dog creamated a few hours after he died and I'd like to turn a nice Urn to keep his remains in for her.

Any information would be greatly appreciated.

Thanks.

Re: Need information on Turning a Pet Urn

#2

Re: Need information on Turning a Pet Urn

Jennifer@Indy.USA

>I think it was Ed Moore who recently turned an urn for a dog? Ed....was that you?

???

Re: Need information on Turning a Pet Urn

#3

Re: Need information on Turning a Pet Urn

RussFairfield

>The common rule for the size of a pet urn is one cubuc inch of volume for each pound of weight of the healthy animal. You might leave a few extra just in case.

Re: Need information on Turning a Pet Urn

#4

Re: Need information on Turning a Pet Urn

Ed Moore

>David,

I turned this urn for a Yorkshire terrior. Russ suggested a rule of thumb for determining the size. I put threads on this box and I think urns should have threads. Basically I know nothing about what is appropriate for an urn. But I think there are metal threads which can be purchased if you do not have access to a threading jig.

Sorry that I'm not more help.

Ed


img

Re: Need information on Turning a Pet Urn

#5

Re: Need information on Turning a Pet Urn

Robin

>David ,

I also have a question about urns. If you do use a threaded lid/finial what would be a minimum diameter opening for pet or human urns?

Robin

Re: Need information on Turning a Pet Urn

#6

Re: Need information on Turning a Pet Urn

David Lykins - Marietta GA - guitardude

>That's a good question, as I've been informed that the remains will be placed in some sort of bag, and the bag is actually what goes in the earn. So I guess you'd have to ensure that the bag could pass through the opening of the urn.

Also a source for the threaded peices would be helpful if anyone has one.

Re: Need information on Turning a Pet Urn

#7

Re: Need information on Turning a Pet Urn

Ernie Miller

>I would calculat a littl more that 1 CI per pound. when I made one for my dad a year ago I made it larger and any smaller would have been to small. I would go 1.2-1 just to be safe although if it is to small you can allways sperad the extra at his favorite dog park or some other place. I see no need for a screw on lid I would just glue the lid on tight after he is place inside there is no need to remove him at a later date.