Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

Keith's visit to LI

Posts

Keith's visit to LI

#1

Keith's visit to LI

Ed Kelle

>Yesterday Keith Tompkins came to visit the Long Island Woodturners. We were fortunate to have him the entire day. He demonstrated how he creates his turned rose piece which is up for the Niche award.

Keith stressed the importance of both good technique and good design, both issues that we discuss here frequently, so for me, yesterday was like WC live and in person. He taught us a new tool technique of using your tools on their side to get clean cuts, flutes facing 3 or 9 o clock. I tried it when I got home and rigt off the bat, I was able to do this with good results in chippy mahagony. One important thing I picked up was using your entire body movement to control your tool, something you don't get to see too often on videos. I watched him control the handle with his forearm, his torso, and even his lowe body movements. I even took notice of his foot movement and how he braces himself.

As Keith demo's his process, the entire creation of this fantastic work really made sense. Of course just looking at the final photo, you'd think it was impossible until you saw him do this.

Keith talked about how anything is possible on the lathe, and this demo sure showed it to be true. He gave us all the inspiration to be creative and challenge ourselves to go beyond what we think we can do. My head is full of ideas right now, heck I had a hard time concentrating on my drive home yesterday.

Don't miss your chance to see Keith at the Symposium. And even better, bring him to your club for a whole day. You sure can't beat that. He is talented, creative, innovative, and one of the most down to earth friendly people you will meet.

Thanks for a great day Keith!

Here he is showing his detail gouge hollowing techinque for the rose


img

Re: Keith's visit to LI

#2

the stem

Ed Kelle

>Yes he even turns the stems!

Re: Keith's visit to LI

#3

Re: the stem

Ed Kelle

>

Re: Keith's visit to LI

#4

Re: the stem 

Ed Kelle

>


img

Re: Keith's visit to LI

#5

and he turned a cube base

Ed Kelle

>I'm not going to give this all away, but he turned a cube as well.


img

Re: Keith's visit to LI

#6

Re: Keith's visit to LI

Ron in Drums PA

>Neat Ed

What part of Long Island are you from?

Re: Keith's visit to LI

#7

Keith Tompkins

Re: and he turned a cube base

Keith Tompkins

>Thanks Ed! My goal when I do one of these sessions is to inspire other turners, not to promote myself. I try to really shake up the grey matter....It was great to meet you, your fellow turners, and to try out your great new lathe.

Here is a pic of the finished piece....all turned, including the cube, with some carving for the root system and other details.

Thanks for having me!


img

Re: Keith's visit to LI

#8

Re: and he turned a cube base

Allen Neighbors

>OK. I'll bite. Is this a big turning secret... "turning" a cube?

Anything to get the gullible "newbie", right?

Color me red AND green.

AL

Re: Keith's visit to LI

#9

Keith Tompkins

Re: and he turned a cube base

Keith Tompkins

>HI Al, No not really a secret, the Chinese have been turning cubes within a sphere for thousands of years.

I turn cubes for two reasons...One, I am a turner, so I turn the cube as well as the rest of the piece. Two, turning a cube shows the possibilities of the lathe, and helps me to demonstrate there only self-imposed limitations.

After the demo, anyone in attendence could easily turn a cube on the lathe.....the big secret is KNOWING and BELIEVING it can be done! Try it....it involves turning a piece from three axis points.

Re: Keith's visit to LI

#10

Re: Statement and Question

Allen Neighbors

>Okay. I believe you, but I'm going to have to really think this out, and you can't imagine how much that's going to hurt.

So when are you coming to Texas? :o)

Thanks for answering my post, Keith, I really do appreciate it.

AL

Re: Keith's visit to LI

#11

Keith Tompkins

Re: Statement and Question

Keith Tompkins

>HI Al, It's easy, believe me. It's one of those " why didn't I think of that?" kind of ideas. If you want some help, just e'mail me.

Texas? Hook me up, I'll be there! Actually, I'm working on it.

Re: Keith's visit to LI

#12

Re: Texas

Allen Neighbors

>Thank you. Let me know when and where, if you demo in Texas, please.

AL

Re: Keith's visit to LI

#13

Re: Keith's visit to LI

Ed Kelle

>Ron

I am from Glen Cove, northwest part of LI. The club meets in Dix Hills, which is mid island.

Re: Keith's visit to LI

#14

Re: and he turned a cube base

Don Tewell

>When my wife saw the photo of the rose, she told me "OK learn that". Now maybe I can convince her I need a bigger/better lathe. One of these days I would like to see how that is done.

Re: Keith's visit to LI

#15

Re: Keith's visit to LI

Ron in Drums PA

>I grew up in Jericho

Re: Keith's visit to LI

#16

Keith Tompkins

Re: and he turned a cube base

Keith Tompkins

>Don. come to L'ville! Sit up front! Hope to see you there.