Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

New Turner needs advice on

Posts

New Turner needs advice on

#1

New Turner needs advice on

Rich Pearson in Mill Creek, WA

>What chucks I need. I have a JET 1236 and basic lathe chisels. I have read a lot of the turning related articles and am leaning towards a One Way Talon chuck system.

I am going to learn to turn bowls. What kind of jaws/adaptors would I need for this chuck?

Any good (cheaper than Rockler or Woodcraft) sources that you know of?

Specialty chisels?? What would I need to have to get started?

Any turning clubs/associations in the greater Seattle area?

The pictures I see posted are really inspiring and I hope to someday be able to turn something worth posting myself!

Thanks in advance

Re: New Turner needs advice on

#2

Re: New Turner needs advice on

Sean Troy

>http://home.comcast.net/~seattleaaw/ web site for the local turning club. The jaws that come with the chuck are good for starters. 3/8" bowl gouge or 1/2". Craft Supplies always has a good selection of everything. The BEST thing you can do to learn and improve is join your local turning club. welcome and best of luck. Sean

Re: New Turner needs advice on

#3

Re: New Turner needs advice on *LINK*

Rick Davenport

>Welcome to woodturning!

The past president of the Seattle AAW lives in Meadowdale and she frequents woodcentral.

I live in Edmonds, but I won't be as much help as Molly because I'm a semi-newbie.

There is a "sawdust session" coming up a week from Saturday in the Bothell area.

This would be a great place to start.

Rick Davenport


http://www.notsodull.com

Re: New Turner needs advice on

#4

Another Way..

Wally Dickerman in Arizona

>A lot of new turners are under the impression that they need a chuck to turn bowls. The 4-jaw chuck became available around 1990. We turned a lot of bowls before then. I have 2 chucks but I seldom use them. Instead I prefer to use a glue block. All that's needed is a faceplate, which you probably already have. When I teach turning classes, the students usually use glue blocks with great success. Put your money into good tools and plan on getting a chuck later.

Wally

Re: New Turner needs advice on

#5

Re: New Turner needs advice on

JERRY COX -TEXAS

>I have found that PENN STATE IND.www.pennstateind.com has some outstanding buys on tools,accessories,wood,machine accessories, etc.

It is worth a visit. I am retired & have to be frugal

Re: New Turner needs advice on

#6

Thnk you all. I will

Rich Pearson in Mill Creek, WA

>try to make the AAW chapter in Redmond, WA and maybe the sawdust session coming up.

I'll hold off on throwing more $$$$ at this for now.

Re: New Turner needs advice on

#7

Re: Another Way..

Don Henthorn

>I agree with Wally. I finally bought a chuck last year, but I still prefer to turn with a glue block. My feeling is that I can do all the turning and sanding except for the very bottom without having to change a thing. Then after oarting off a jam chuck or a doughnut chuck make finishing the bottom easy.