Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

Safety Tip

Posts

Safety Tip

#1

Safety Tip

Bert Smith

>Last night I was turning a blank using one of the screw - on type tool rests; the type that lets you interchange different length bars on a threaded post. Evidently the vibration from roughing out the bowl loosened the bar, and it spun into the wood, breaking my thumbnail and generally causing a good scare.

From now on I will tap the bar with a wooden mallet to make sure there is a tight connection, which is probably mentioned in the instructions that I neglected to read...

Just thought I'd pass this along.

Have a great and safe weekend,

Bert

Re: Safety Tip

#2

Re: Safety Tip

John Lucas

>Bert It's been several years since I bought mine but I believe it says something to the affect of turn it 1/4 turn past snug or some such thing. I haven't had mine come loose and have had it for at least 3 years. Of course I don't swap the stem either.

Re: Safety Tip

#3

Lock Tite

Phil Joines

>Sorry to hear about your acident. For any threaded connection that needs to stay tight use Lock Tite thread locking compound. You can get small tubes at auto supply stores. It comes in perminate and reuseable verities and in differant formulas for differant size screws. Clean both threads with solvent before using.

Re: Safety Tip

#4

Re: Safety Tip

Chris Teenor

>I have one of this type of tool rest system. The stem has a flat milled into it for a wrench. Hasn't come loose on me, yet.

Re: Safety Tip

#5

Re: Safety Tip

woodnut

>I have the same ones,and I have to agree,either don't change them,and buy extra posts,or use the wrench and tighten them real good.Sorry about your mishap.

Re: Safety Tip

#6

Re: Safety Tip

Roger

>Hey Bert,

Sure hope you didn't mess up a good piece of wood with the tool rest coming loose and all, seeing as how you're short on wood. I know you got one more thumb!!! Seriously though, it's a good lesson for us all, to make sure every thing is as tight as it should be. Good luck and be safe.

Roger 8o)