Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

My Blemed Scorpion Arrived!

Posts

My Blemed Scorpion Arrived!

#1

My Blemed Scorpion Arrived!

Eddie Pacheco; San Jose, Ca.

>Fresh from the UPS truck! And it don't look too blemed. Some portions don't look as glossy as the rest of the tool, but it's not like any of the chrome is peeling.

The system looks great to me and I'm a happy camper. Not having this tool is what was holding me back, right?....:-)

Thank you, Don Pencil.

Re: My Blemed Scorpion Arrived!

#2

Don Pencil

Re: My Blemed Scorpion Arrived!

Don Pencil

>Eddie,

Glad you are happy.

Here is how it works with the "blems"

All of the tool bits are NOT blems.

Not necessarily all of the parts in the set will be blems, although that might be true.

A blem might be bad chrome, a part that came out ugly for some other reason, parts that in some way are not exactly the shape they should be.

Whatever the reason, these parts cannot go to the distributor.

None of the blem "problems" will affect function (they are fully garenteed). You just would not be happy if it came from the distributor looking like that.

In most cases, unless you have a non-blem to compare to, you will not be able to see much difference.

Please let me know, either here or by e-mail, how it works for you and/or any suggestions you may have.

Be Well,

Don

WWW.DONPENCIL.COM

Re: My Blemed Scorpion Arrived!

#3

Re: My Blemed Scorpion Arrived!

Kurt From Jersey

>Hey Don! There isn�t a video out there showing it in action is there? Be cool to see it in the hands of an expert!

Re: My Blemed Scorpion Arrived!

#4

I'm real happy with it!

Eddie Pacheco; San Jose, Ca.

>I sharpened the various bits/scraper discs per the enclosed instructions and went out and tried it on my first "deep" vase that I am attempting. I started this vase earlier this morning using the Sorbey Midi Hallower and stopped after going 4" into the piece as I was getting some chatter and was just plain strugling with the cut or scraping action of the circular insert.

I tried it again just now with the scorpion and small teardrop insert. Wow, what a difference! The heft of the tool and pistol grip got rid of the chatter and I had better control of the tool in general. This wood is a little damp from being out in the yard so I'm not going to go to final thickness yet.

The wood is maple that I got a long time ago from Ace Foster and the Silicon Valley Woodturners. It was anchor sealed and has sat outside for about 2 years, I think.

The dimensions are 5 1/4" tall x 5 5/16" dia. and the wall thicknes is 3/8" to 5/8" near the bottom. I'm trying to shoot for having the inside follow the contour of the outside.

And, yes, it does wobble a bit when cutting near the opening, and I'v had to stop and reseat the vase into the chuck due to mini catches from too heavey of a cut and/or a few cases of wrong tool orientation.

I'm using an old Atlas lathe w/1hp motor that I have had for about 4 yrs. but seldom used. I also have a new unused Jet Midi lathe that I haven't found a place for in my garage. The chuck is a Vicmarc.

Oh, that is indeed a an outdoor light switch that is being used for the lathe ON/OFF switch. I know better, but I just haven't changed it.

Thanks again, Don, the Scorpion looks good enough to me and should help me improve my skills.


img

Re: My Blemed Scorpion Arrived!

#5

Re: My Blemed Scorpion Arrived!

Nick Tuzzolino

>Hi Don: There is a whole bunch of us at Cerritos College turning classes that just love those "blems".; Thanks for making all the other accessories easily available for us. Nick