Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

Sphere on JET Mini?

Posts

Sphere on JET Mini?

#1

Sphere on JET Mini?

K.S.SONG

>Hi

I would like to make some rosary of Catholic for present,

diameter approx. 5~30mm with hardwood(like African blackwood) on my JET Mini.

To make true sphere shape is not easy to me, especially to make all spheres uniformly.

Are there any suitable tools, tips, video tapes for it?

Please let me have your advice.

K.S.SONG / Seoul Korea

Re: Sphere on JET Mini?

#2

Re: Neck problems *LINK*

Fred Holder

>There is a sphere turning rig available from Craft Supplies Ltd. in England as shown in the photograph. I used pipe fittings to make it fit my Nova DVR. I originally made one from wood that worked pretty well. It should handle the sizes of beads that you wish to turn. This is a swinging tool. The pivot point must be under the center of the sphere to be turned. Swing it both directions and then move in the cutter a little bit and swing it again. Repeat this until your sphere is to the desired size. Reverse the bead between cup centers as shown in the picture to cut away the little tenons on each end.


Fred Holder's Domain Site

Re: Sphere on JET Mini?

#3

Re: Sphere on JET Mini?

Fred Holder

>I don't know what went wrong with the last post. So will try again.

There is a sphere turning rig available from Craft Supplies Ltd. in England as shown in the photograph. I used pipe fittings to make it fit my Nova DVR. I originally made one from wood that worked pretty well. It should handle the sizes of beads that you wish to turn. This is a swinging tool. The pivot point must be under the center of the sphere to be turned. Swing it both directions and then move in the cutter a little bit and swing it again. Repeat this until your sphere is to the desired size. Reverse the bead between cup centers as shown in the picture to cut away the little tenons on each end.


img

Re: Sphere on JET Mini?

#4

Re: Sphere on JET Mini?

JKJ in East TN

>K.S.,

Can you get Mike Darlow's book "Woodturning Methods"? It has a excellent chapter on turning sphere. He covers turning a perfect sphere by hand with no special tools as well as some sphere turning devices and aids.

JKJ

Re: Sphere on JET Mini?

#5

Re: Sphere on JET Mini?

K.S.SONG

>Dear Fred Folder and JKJ

Thanks for useful comments.

I will try do that.

Good luck.

K.S.SONG /Seoul Korea

Re: Sphere on JET Mini?

#6

Re: Sphere on JET Mini?

Tony - Memphis

>Woodworking at Home had a segment that showed how to turn spheres. They have a website and you can order back issues of their DVD.

Tony

Re: Sphere on JET Mini?

#7

Re: Sphere on JET Mini?

Barry Irby

>I have turned a number of spheres by hand. Once you learn how and practice, it's not really difficult. If you are interested, I will try to describe how I do it. Either e-mail me or ask and I will try to type it out here. Its not magic and does not require special tools. I would think that it would not be necessary for beads to be perfect.

Re: Sphere on JET Mini?

#8

Re: Sphere on JET Mini?

K.S.SONG

>Dear Barry Irby

Thanks for your comment.

I sent email to you.

Your further comments should be very useful to me.

Good luck.

K.S.SONG

Re: Sphere on JET Mini?

#9

Re: Sphere on JET Mini?

K.S.SONG

>Dear Tony

Thanks for your kind comment.

I found that homepage and will be try further for it.

Good luck

K.S.SONG /Seoul Korea