Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Portable Sawmill & Tree Service – Abingdon, VA

Reverse Sanding at 60rpms on a Jet 1236

Posts

Reverse Sanding at 60rpms on a Jet 1236

#1

Reverse Sanding at 60rpms on a Jet 1236

Ron in Drums PA

>


My sewing machine had some problems, so I bought a new one. Since the motor was good I decided to strip it out and use it on my lathe.(Yes I sew, the first sewing machine was a father's day gift from my wife and two daughters.)

I was turning something with a very small hole which only my pinky squeeze into. I didn't feel comfortable sanding the inside with the lathe running at 500rpms so I quickly slapped this together last night before the chat. Along with the foot pedal to turn it on and control the speed it worked great.

I admit the motor was a bit warm when I was finished so I may need to come up with a better motor once it burns out, but until then this works great.

Re: Reverse Sanding at 60rpms on a Jet 1236

#2

Re: Reverse Sanding at 60rpms on a Jet 1236

Chris K in MD

>neat idea - good job!

Glad my 3520 doesnt need to do that! ;-)

Chris

Re: Reverse Sanding at 60rpms on a Jet 1236

#3

Re: Reverse Sanding at 60rpms on a Jet 1236

John Lucas

>Great job. I thought about doing that from the handwheel side on my mini lathe. I wanted it to apply finish, not sanding. I have a 60 rpm gearhead motor that I've been hanging onto. Now you've gone and got me excited about doing it again. Even screwed up my english.

Re: Reverse Sanding at 60rpms on a Jet 1236

#4

Re: Reverse Sanding at 60rpms on a Jet 1236

Ron in Drums PA

>John

I tried to do this on the handwheel side and on the skinny part of the chuck and the belt would just slip.