Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

Easy Do it Yourself Work Holder

Posts

Easy Do it Yourself Work Holder

#1

Easy Do it Yourself Work Holder

Jennifer@Indy.USA

>Here's an easy do it yourself work holder that one of the guys in the class, Jimmy Aldridge, brought to Arrowmont last summer. I thought is was just a fantastic idea and he let me take pictures of it. I haven't made one yet but it's on my list. I think the onlything he didn't get at Home Depot was the threaded rod. He had to buy that somewhere else so it would match the threads on his chuck.Other than that it's just a trailer ball hitch about $9.00 and some 3/4 ply, some Threaded nut doo-dads and some wing nuts or knobs underneath. I used it plenty that week and found it to be right up my alley....worked great, easy to make, and won't cost me a ton!

Jen



Re: Easy Do it Yourself Work Holder

#2

Re: Easy Do it Yourself Work Holder

Roger Smith

>Thanks for the pictures. I just purchased a die on ebay to do this. The seller had 6 more at $6 each if someone is interested. The seller may be contacted at slash1969@msn.com.

Re: Easy Do it Yourself Work Holder

#3

Re: Easy Do it Yourself Work Holder

Ken Grunke from SW WI

>Simply ingenious. Now, if a hitch ball comes with 1" x 8 tpi threads, I wouldn't need a threaded rod--just screw the chuck or faceplate on direct.

I'd think it would be more convenient with the wingnuts or knobs on the top, as long as they don't get in the way.

Re: Easy Do it Yourself Work Holder

#4

Re: Easy Do it Yourself Work Holder *LINK*

Clint Butler

>For anyone interested, I have two 1-1/4" x 8 tpi thread dies left.

$16 shipped for one, or $22 shipped for both of them. I accept PayPal with no fees.

Thanks to all who have bought dies already. I never thought of posting metalworking tools on a woodworker's forum. :)


img

Photo #2