Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

*** SURVEY: THE IDES OF JANUARY ***

Posts

*** SURVEY: THE IDES OF JANUARY ***

#1

Ellis Walentine

*** SURVEY: THE IDES OF JANUARY ***

Ellis Walentine

>I posted this yesterday on the main messageboard. Now here's a chance for you turners to chime in from your own unique vantage point..

The "Ides of ..." surveys are your chance to share a few of your words of wisdom with our visitors and with the readers of Woodworker West magazine. Every two months, we post a question of interest to woodworkers, and you weigh in with your thoughtful replies. We edit the whole thing into a savory stew and send the results off to Ron Goldman out in LA, where he and his accomplished staff render it onto pages. We archive past columns here on WoodCentral, although I am woefully behind at the moment. Pardon me for that.

This month's question comes to us from none other than book reviewer and WoodCentral editorial assistant, Barb Siddiqui. I don't know what got Barb thinking about this topic, but here's the question ...

"If a friend or family member came to you wanting to begin woodworking,

how would you go about advising them to start? What advice would

you give a beginner about tools, shops, equipment and materials?"

Thanks for participating!

Ellis Walentine, Host

Re: *** SURVEY: THE IDES OF JANUARY ***

#2

Steven Antonucci

Learn to sharpen

steve antonucci

>Almost any wood related activity will greatly benefit from sharp tools. Turning or flatwork, learning how a tool cuts, and being able to get a consistently sharp edge is a critical skill to master.

Steve

Re: *** SURVEY: THE IDES OF JANUARY ***

#3

Roger Dunn

Safety around all power and hand tools first>

Roger Dunn

>

Re: *** SURVEY: THE IDES OF JANUARY ***

#4

Re: *** SURVEY: THE IDES OF JANUARY ***

Scott Hogsten

>Can I contribute 2 ?

To all

Start now ! In other words quit worrying and start woodworking/woodturning/carving whatever.

For woodturners

Get out and turn, turn, turn. Waste a lot of wood, make tooth picks, rough a lot of bowls.

Scott

Re: *** SURVEY: THE IDES OF JANUARY ***

#5

Learn to draw it

Jorge Castaneda

>If you can draw it, you can build it.

That is how my father started me at age 9.

Jorge

Re: *** SURVEY: THE IDES OF JANUARY ***

#6

Re: *** SURVEY: THE IDES OF JANUARY ***

David Breth

>1) I certainly agree with Scott. For years my parents have given me some cash as part of Christmas gift giving, and I have nearly always paid bills with that money. Last year however, I bought a lathe. I couldn't easily afford it even with the gift, but I couldn't be happier that I finally did the "irresponsible" thing with the money.

2) Do not overlook the importance of dust collection as a health consideration, and do not overlook the importance of personal safety items such as a facemask. Wear gloves for finishing - nasty stuff soaks in through your skin.

3) See if you can't find a club, friends, or family to help you get started. Ask dumb questions. Be safety-minded. The learning curve for somebody completely new is significant, everybody was there once, many of us still are, and I don't think you'll find a group of people more apt to help than woodworkers.

4) Be patient with yourself in your development. Make it a specific point to learn something from each item you make. Ultimately it is you versus a piece of wood. You're bigger, but the wood gets the final word.

David Breth

Re: *** SURVEY: THE IDES OF JANUARY ***

#7

Run away

John Lucas

>Run as fast as you can and cut up your credit card before you catch the addiction. There is no turning back. If the flat side doesn't get you the turning side will.

Re: *** SURVEY: THE IDES OF JANUARY ***

#8

Re: *** SURVEY: THE IDES OF JANUARY ***

gary s clarke

>I think that the best thing a beginer in woodworking can do is take classes at a local community college. This will give them the basics and teach them safety above all. I did this after I retired and really learned a lot. Then I wanted to learn to turn, I had not turned since jr hi, so I took classes in turning at a woodturning center. The next thing to do is get advice on basic woodworking books and buy some or use the library and read as much as you can and only after that buy some starter tools. Just my .02.

Re: *** SURVEY: THE IDES OF JANUARY ***

#9

Re: *** SURVEY: THE IDES OF JANUARY ***

Ken Grunke from SW WI

>Come hang out in my shop. But be forewarned, I'm messy and disorganized. In exchange for the use of my tools, space, and guidance, help me make my shop a cleaner, safer, and more organized space. Buy me a dust collector, or at least a new bandsaw blade.

Re: *** SURVEY: THE IDES OF JANUARY ***

#10

Re: *** SURVEY: THE IDES OF JANUARY ***

Jim Shaver - Oakville, Ontario

>Hi Ellis,

I'd say joing a club and enjoy learning from a broad group of people with many interests!

Take care,

Jim

Re: *** SURVEY: THE IDES OF JANUARY ***

#11

Re: *** SURVEY: THE IDES OF JANUARY ***

Ace Foster in Port Orchard

>With all the books and videos and schools out there these days, it's a great time to learn. Steer the ww-to-be to some of these things, depending on the particular interest.

And at the risk of being thought a smart-ass, I note that the Ides of the month occur on the 15th only in March, May, July and October, and on the 13th otherwise.

Ace