Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

Big Bubinga Bowl (plate?) pics

Posts

Big Bubinga Bowl (plate?) pics

#1

Big Bubinga Bowl (plate?) pics

Bill Grumbine (Kutztown PA)

>Greetings all

This is probably one of the most stressful pieces I have turned lately, mainly because of the wood. Most of my wood, regardless of figure, species, or whatever, is found wood, firewood really. This piece wasn't. Last month I did a demo on the various lathes offered for sale at our local Woodcraft store. While I was in the store discussing what to turn with the store owner, she points over to a series of blanks sitting on the floor and says, "There, turn one of those." One of "those" was a chunk of bubinga board, 18" square and 3" thick. Since it was highly figured, it was also highly priced, at $175.00 for the chunk.

Enter the stress. Like I said, I turn firewood. I'm not used to wood that costs any more than the effort to get it home and get it processed. But anyway, off I went to the demo, and things went very well, except that I did not get to finish this particular piece. So, I brought it home, and here it languished over the holidays and through a killer cold, until tonight it is ready to see the light of day (so to speak).


Here is a shot of the profile. It finished out at 17 1/2" in diameter and 2 3/4" high. It is pretty uniform in thickness at 1/4" thick. With it being as large as it is and as shallow as it is, I am wondering whether to call it a bowl or a plate. Of course, for the proper alliteration in the title, it had to be a bowl!


Here is a shot of the inside. It is not the best of the figure, but I spun it and spun it and just couldn't get the camera to see what I was seeing. But, if you are in the Allentown PA Woodcraft store you just might get a chance to see it. Just don't look too close. After all, it is a demo bowl. ;-)

Thanks for taking a look.

Bill

Re: Big Bubinga Bowl (plate?) pics

#2

JL

Re: Big Bubinga Bowl (plate?) pics

JL

>You are right, you don't have any sense of "depth" in your second photo. Still is a nice looking "bowate" or "plowl".

Re: Big Bubinga Bowl (plate?) pics

#3

Re: The wood we most....

JamieDonaldson

>... often turn is called "value added firewood" Bill! This piece just had more value before you started and therefore even more value when you finished!

Re: Big Bubinga Bowl (plate?) pics

#4

Ba-da-bing! What a bowl!

Dominic Greco in Richboro PA

>Bill,

It looks awesome! What finish did you use on it? The Bush Oil?

See ya around,

Dominic

Re: Big Bubinga Bowl (plate?) pics

#5

Re: Big Bubinga Bowl (plate?) pics

Jim Shaver - Oakville, Ontario

>Hi Bill,

A lovely turning, what a beautiful piece of wood..

take care,

Jim

Re: Big Bubinga Bowl (plate?) pics

#6

Re: Big Bubinga Bowl (plate?) pics

Carole Valentine

>Smart lady. She now has a huge Grumbine bowl in gorgeous wood that she will probably sell for many times what the blank was worth! Oh, and I vote for "bowl". ;)

Re: Big Bubinga Bowl (plate?) pics

#7

Re: Big Bubinga Bowl (plate?) pics

Bill Grumbine (Kutztown PA)

>Thanks for the comments everyone. Dominic, you are right, I used Bush Oil on this. Again it did a very nice job for me, although this stuff is harder and oilier than I am used to, so a lot of it seeped back out. A little elbow grease and steel wool took care of that.

Jamie, I know what you mean about value added, I just like to be the one doing the adding!

Carole, when I took it into the store last night, she was discussing several options, one sending it to the bubinga vendor, one keeping it in the store to entice people into the world of woodturning, and one taking it to some sort of Woodcraft trade show gathering. It will be interesting to see what happens to it.

When I walked into the store last night, the guys at the counter asked me if I had brought it in for the guild meeting. What guild meeting I asked? I had forgotten about our monthly woodworking guild meeting, so I called SWMBO to tell her I would not be coming home anytime soon, and went with my bowl for show and tell. If I had known about the meeting, I would have dressed nicer. ;-)

Bill

Re: Big Bubinga Bowl (plate?) pics

#8

Re: Big Bubinga Bowl (plate?) pics

chris rolke

>that is a beautiful piece bill

i can see where you would be a little nervous to turn something like that

i know i would be extremely nervous

Re: Big Bubinga Bowl (plate?) pics

#9

Re: Why would Bill be...

JamieDonaldson

>... nervous- he didn't buy the wood??!!

Re: Big Bubinga Bowl (plate?) pics

#10

Re: Big Bubinga Bowl (plate?) pics

George Van in WI

>I'm glad the turning was left to you Bill. I would hate to turn wood that cost more than my firs lathe! I too am comfortable with firewood.

Re: Big Bubinga Bowl (plate?) pics

#11

So you'll be bringing it to Bucks next Monday?

Craig Daymon

>Hate to think you'll leave us out. (Kidding, I know it's a long drive for you.) Nice piece, I'm a big fan of figured bubinga.

-Craig