Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

Turning Ply

Posts

Turning Ply

#1

Peter Charles Fagg (UK)

Turning Ply

Peter Charles Fagg (UK)

>Does anyone here turn ply on a regular basis?

I have tried only one piece to make a 2 foot diameter platter, an offcut, and found that the quality of the (veneers?) varies considerably.

What criteria do you apply to the quality of the ply? Marine ply, shuttering ply, Birch ply, all purpose ply?

Regards Peter.

Re: Turning Ply

#2

Re: Turning Ply

Dave Winters, Steamboat Springs, CO

>Here in the "hardwood deprived" high country of Colorado, I turn quite a bit of engineered materials. Plywood mostly. You really want hardwood plys throughout. This means Baltic Birch ply or Marine grade lauan ply. I scored some great stuff from some spiral stair treads that were being torn down. Thick plys and all hardwood. Never seen any before or since.

Glue up with plenty of glue and clamps. Use respirator and dust collection as you're never sure what kind of glue they use for the plywood. Can be Urea resin which is a known carcinogen I believe. Nasty stuff either way.

Plywood is no fun to turn, but can yield striking results. Play around with it, start small with eggs or a small bud vase or something, see if you like it.


img

Re: Turning Ply

#3

'nuther 'un

Dave Winters, Steamboat Springs, CO

>This is a chair I did, all plywood, no fasteners whatsoever.


img

Re: Turning Ply

#4

'nuther 'un yet 

Dave Winters, Steamboat Springs, CO

>


img

Re: Turning Ply

#5

Great looking Chair

Randy Gleckler

>there Dave... Nice work. I agree Hardwoods in Colorado are interesting to try and find.. :-)

Randy

Re: Turning Ply

#6

Awesome Chair, Dave.

Paul in Phoenix, AZ

>

Re: Turning Ply

#7

Re: Turning Ply

Stuart Johnson

>I've turned a couple bowls out of regular Home Depot plywood. I didn't pay any attention to the few voids as I was just working on form. I did finish one by painting tinted epoxy and allowing the it to fill the voids. I then did the finishing cuts which left the occasional colored spot. All in all it came out rather well.

Re: Turning Ply

#8

Re: Turning Ply

Bill Stehman

>Peter,

I enjoy turning Baltic birch 9 ply plywood laminated several times, , fewest voids of all plywood's and some spectacular results. The dust and sanding can be annoying but well worth the effort as Dave just showed.

Bill

Re: Turning Ply

#9

Re: 'nuther 'un

Don Tewell

>How did you fit that on your lathe? Beautiful work though.

Re: Turning Ply

#10

Peter Charles Fagg (UK)

Re: Turning Ply (Thanks)

Peter Charles Fagg (UK)

>Thankyou to all who responded, much appreciated. At least I know now to get the highest quality ply available rather than just the off-cuts. Peter.

Re: Turning Ply

#11

Re: Turning Ply

David Lykins - Marietta GA - guitardude

>That's really a great bowl, I was in a shop about a month ago and they had boxes made from plywood. What the guy/gal had done was to sand/carve the top and sides so the laminates of the plywood were exposed. Then they stained it and put a sating type of finish. Once I realized what they had done, I realize they were really pretty ingenious in how they used the wood.

The bowl looks great!