Garrett, or anyone else...
W.C. Turner
>Were the different ways of holding work on the lathe, that was posted sometime ago by John Lucas, ever put into an article? I think it would be beneficial to everyone.
Thanks,
W.C.
Knowledge You Can Build On — Est. 1998
Garrett, or anyone else...
W.C. Turner
>Were the different ways of holding work on the lathe, that was posted sometime ago by John Lucas, ever put into an article? I think it would be beneficial to everyone.
Thanks,
W.C.
Re: Garrett, or anyone else...
Bruce in Saint John, N.B. Canada
>Fred Holder published a book titled "A guide to Work-Holding on The Lathe". Perhaps you could check his web site. Hope this helps out.
New Articles
Garrett in Victoria
>I must have missed it. I just did a search back to October - wow, John posts a LOT! - and didn't see anything obvious. If you or someone else can point me to it it shall be done.
BTW, we have more than 30 new articles in production at the moment, all of them "by author" with photos rather than Messageboard excerpts, so check the A&R Dept. from time to time.
For those who haven't checked recently, there are three excellent pieces on wood species and characteristics published recently in the Shop Section, plus, of course, several in the Turning Section.
Cheers, Garrett