Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

Screwed up oak bowl

Posts

Screwed up oak bowl

#1

Screwed up oak bowl

Don Henthorn

>It has been a few months since I have turned anything. Senile lethargy I guess. I had a

piece of red oak on the shed floor so I decided to turn a natural edged bowl. Got the pilot hole for the screw chuck crooked and shelved the idea. Cut the natural edge part off and had a much smaller blank. I rough turned the resulting blank for the DNA bath and made it a half inch thick. WRONG, DON!!!!! Should have followed BG�s advice to make the rim thicker. The rough bowl warped too much to make the nice curve I had planned for the sides. I did the best I could with what was there and this is the mangy result. Of course it had to happen with the nicest piece of wood I have had since Carole sent me the box elder blank. Grrrrrrrrrr!!!!!!













Re: Screwed up oak bowl

#2

Re: Screwed up oak bowl

David Breth

>It might be a save, but I'll tell you, I like it. I prefer simple forms over any thing else, and you got the oak to show off its stuff, so to speak. I like it when oak pieces show the strength and power of the wood - and this one does.

I say that offering my usual pearl, that you just got my 2-cents, but you've got change coming.

David B.

Re: Screwed up oak bowl

#3

Re: Screwed up oak bowl

Niedling

>Don,

I liked the final bowl.

You mentioned that you started to use a screw chuck, but got it crooked. I never use a screw chuck for natural edge bowls. I turn it between centers to begin with as I shape the outside of the bowl. I can adjust the bowl between centers as I turn to get the natural edge even on both sides. I turn a tenon on the bottom once the outside shape is done. Take it off the lathe and remount the tenon in my stronghold chuck. Then hollow out the inside.

I know that there are many different ways, but this is the way Bobby Clemons showed me and it works great.

Re: Screwed up oak bowl

#4

Re: Screwed up oak bowl

Don Henthorn

>Thanks, Mr. Niedling. I'll try your method next time. Sounds like something I should have thought of.(G)