Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

FINALY! It's alive

Posts

FINALY! It's alive

#1

FINALY! It's alive

Kudzu

>Well after several months of just sittin and collecting dust I have the old J-line I bought going tonight. It's a 3 phase motor so I installed the Variable Frequency Drive. Installation was simple (for me anyway). It took a couple of hours but I had a false start. I was going to keep the Mag Switch that was on the lathe because I liked the big stop and start buttons, but turned out the switch was dead. So I had removed it and remounted the VFD and wired it direct to the motor.

Operation is very smooth and any speed you want. I still prefer to use the Reeves drive as the handle is more convenient than the dial on the drive.


I then found this blank I made when I got the lathe. Despite the fact the lathe was sitting in the middle of the floor and that I had to steal a plug off my table saw I HAD to try it out.


Nothing to brag about but I see my idea will work. Now I will spend some time on making some good blanks. But man it felt good to be turning again. First completed turning in 14+ years!

Re: FINALY! It's alive

#2

Re: FINALY! It's alive

ChuckS

>It's alive, & now you have to feed it. It looks like it has a big appetite.....

Welcome back to turning!

ChuckS

Re: FINALY! It's alive

#3

Re: FINALY! It's alive

John Lucas

>Kudzu My first good lathe was a J-line that I had to completely rebuild. They are solid. I had fun with it until I decided that I needed something bigger. I also learned an awful lot but rebuilding it. I had to machine the tailstock parts, I had a machinist do the headstock spindle, I built all the tool rest parts and then installed a DC motor and controller.

Re: FINALY! It's alive

#4

Re: FINALY! It's alive

Barry Turner

>Who made those things anyway? The high school shop that I did my student teaching in had some equipment two from J-Line. I seem to recall from my college days (back in the stone age) there was an educational supplier by the name of Brodhead-Garrett (or something like that) that carried this line. I kept that old catalogue until just a few years ago. Whenever I needed a good laugh, I would pull it out and check the machinery prices from that day (late-60's). You could have taken $1000 and bought more high quality machinery with it than you could possibly stuff in a two-car garage!

Re: FINALY! It's alive

#5

Re: FINALY! It's alive

Kudzu

>Brdhead-Garret was the distributor. From what I gather Yates-American actually made the lathe and other tools. Here is something I found on OWWT.

"This company was founded in 1906. They specialize in supplying to the educational markets. Though previously not a manufacturer, in the 1960s they bought the J-Line line of vocational machines from Yates-American. Yates-American continued to manufacture the machines but left the marketing to Brodhead-Garrett."

Re: FINALY! It's alive

#6

Keith Tompkins

Re: FINALY! It's alive

Keith Tompkins

>I love this old turning machinery...man, I'd love to start a turning museum! With the popularity of turning, I wouldn''t be surprised to see old equipment rise in value.