Re: Spindle>>>
Sam Dean
>Hi Steve,
I've thought about the same thing myself for a long time. For shafts, any bearing supplier will carry them. If it is hardened, a machine shop may have to anneal the end before it can be machined. A hollow shaft would be ideal so you can use a vacuum chuck, but those may be a little harder to find.
I think the choice of bearings will be a little more important than the shaft type, and the seperation between the bearings on the head stock. To support the radial and axial loads from wood turning, a spherical roller bearing mounted in a pillow block would be best, but they're aweful expensive. A 2" spherical roller bearing from McMaster Carr is almost $210. If you don't use a spherical roller bearing, than some sort of thrust bearing would be necessary.
I guess you need to first determine how big you want to turn, then go backwards from there. Let me know how it goes, it may spark my interest again.
Thanks,
Sam