Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Have a question? Ask Woody!

Wood lathe handles

Posts

Wood lathe handles

#1

Mike Hunter

Wood lathe handles

Mike Hunter

>Does anyone know a good source for wood lathe handles? I have a need for approximently 200 pcs of high quality (ash preferred) lathe handles with ferrale. Preferred length is 17" OAL, but 12" to 15" will work. If possible, I would like to have 100 with a 3/8 hole drilled in one end and then 100 with a 1/2" drilled hole. The hole depth should be about 2 1/4 inches.

Re: Wood lathe handles

#2

Re: Wood lathe handles

Don Evans

>Mike:

I'm gonna quess that you really want lathe TOOL handles as opposed to handles for the lathe itself?

Assuming I've guess correctly take a look at:

www.craftsupplyusa.com

and

www.packardwoodworks.com

One or both these sell just handles without the metal cutting part.

I ordered some ash one's from one of the above (cannot remember which) and they had brass ferrules.

Don