Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

diagonal/cross section views of platters

Posts

diagonal/cross section views of platters

#1

diagonal/cross section views of platters

Jeremy

>Hello all,

Simple question - do you know of any web site that has side views and/or drawings of platters/plates. I can find loads for bowls, but hardly any for platters. Perhaps it is because this is just too simple but I would like to see some ideas/plans/drawings of the cross-section of plates/platters.

thanks for your time,

jeremy

Re: diagonal/cross section views of platters

#2

Re: diagonal/cross section views of platters

John U - Charlotte, NC

>Ray Key has two books that cover this pretty well. If I remember right, the first book listed below covers this a little better.

The Woodturner's Workbook: An Inspirational and Practical Guide To Designing and Making

(http://www.woodworkerslibrary.com/product.php?productid=16862&cat=255&page=2)

and.....

WOODTURNING WITH RAY KEY

(http://www.woodworkerslibrary.com/product.php?productid=16863&cat=255&page=3)

Re: diagonal/cross section views of platters

#3

Re: diagonal/cross section views of platters

Gary in Zirconia, NC

>Wow! I was just wondering the same thing this morning! I'd like to see platters discused some Wed. night after hollow forms.

Re: diagonal/cross section views of platters

#4

Re: diagonal/cross section views of platters

Mike Squire

>Here's something that was posted on WoW by Dean Gartland. It's not ideas or plans but it's a cross-section.

Mike


img

Re: diagonal/cross section views of platters

#5

Re: diagonal/cross section views of platters

n2wood

>Hey thanks Mike for posting it here. You just beat me to the posting. There are so many turners that post on both places.

Dean (N2wood)

Re: diagonal/cross section views of platters

#6

Re: diagonal/cross section views of platters

RussFairfield

>I think that everyone is trying to make this too difficult.

The only thing that is important about the plate or platter is the wood grain, or any decoration that you put on it. Everything is visible, and there is no better way to show off a piece of wood.

After that there are only 3 choices - basic shape, rim and foot. The basic shape can be flat or dished like a shallow bowl. It can have a foot or no foot, a small foot like a bowl, or a wide foot like a dinner plate. It can have a rim or no rim, a narrow rim, or a wide rim. I have never seen any combination of these features that didn't look good on a plate or platter.

There is one other choice that has nothing to do with shape, and that is "thickness". I see there being only 2 choices, one that is obviously "art", and the other that is obviously "useable". One is paper thin to prove you can do it and impress anyone who picks it up, woodturner or not. The reaction you are after is, "WOW, this can't be wood!" That reaction sells plates and platters as "art". The other choice is thick because that means heavy, stable, and "useable"; and there a lot of people who prefer that.