Re: How about 2nd Post with PIC'
David Lykins - Marietta GA - guitardude
>This is a spaleted (as if you can't tell its spalted) bowl I made from a sugar maple tree I got from my sister and brother-in-laws farm in Illinois. The wood is VERY soft, and since I didn't have a bowl chuck (you experienced turners my want to take a deep breateh now) I glued a scrap peice of Jatoba on the back and screwed it onto the small headstock plate that I had. I used a salad bowl finish, and this stuff really sucked it up. After about five or six coats of finish I realized it wasn't going to get much better. I then remove the bowl from the lathe and cut the jatoba block off on the bandsaw. Fortunately the bowl is around 11" in diameter so I stuck it upside down in my planer to get the bottom flat.
My sister has a bunch of this stuff, the peice I got was about 18" wide, 3 feet long and about 6" thick, and it actuall came off the limb of the tree. The trunks are still spalting in my sisters yard, they're about 4 feet in diameter. So I have access to an endless supply of this stuff, I just wish it was a hardwood.
Yea, I know, its time to buy a bowl turning chuck.
Thanks again for looking.
