Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

Spalted Maple Bowl

Posts

Spalted Maple Bowl

#1

Spalted Maple Bowl

Blake Washburn

>This is my first bowl I turned out of spalted maple. It has a big chip out in it. I was wondering how I could go back and smooth it out and put a finish on it.

Blake Washburn


img

Re: Spalted Maple Bowl

#2

JL

Re: Spalted Maple Bowl

JL

>Do you have the chip? If you still have the chip, you could use some CA glue and glue it back in place. If you have most of the chip, you could use some epoxy fill.

Re: Spalted Maple Bowl

#3

Re: Spalted Maple Bowl

Jennifer@Indy.USA

>Blake you could take a coping saw and cut the chip out even more to smooth out the shape....and then cut out another and maybe a third. A triangle of cut outs so to speak. Or you could use the coping saw and make an undulating rim on the bowl totally removing the chip....use the chip out for the beginnings of a "design feature". The sky's the limit :)

Please show us what you come up with it.

Jennifer

Re: Spalted Maple Bowl

#4

or

Tom Sontag - St. Louis

>jsut make the bowl shorter. It would change the overall shape of course, but there is a pretty nice short bowl in there I think.

Re: Spalted Maple Bowl

#5

Re: Spalted Maple Bowl

Blake Washburn

>When I was turning the bowl, it cracked. So, I tood my rotary tool and carve at it and created a desigh feature.

Blake