Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Find a woodworking club near you

Eucalyptus

Posts

Eucalyptus

#1

Eucalyptus

Dennis Bilevich PRESCOTT AZ

>Is Eucalyptus a good wood to turn. Does anyone have any pictures of turned bowls ect to post? I have a change to get some and I don't know if it is worth the trouble.

Thanks,

Dennis

Re: Eucalyptus

#2

Re: Eucalyptus

JKJ

>Dennis,

I've turned Lyptus, which is a plantation-grown hybrid of two types of Eucalyptus trees. The person who gave me the wood cussed it as "turning like granite" - it was quite dry and hard. However, with sharp tools and careful technique I didn't have a problem. It took sanding and finishing very well. (The donor was practically speechless)

I have no idea how Lyptus compares to the Eucalyptus species you have.

Photo below, Watco oil, buffed on back and rim.

JKJ


img

Re: Eucalyptus

#3

Wow, nice John....

Dick Parr

>

Re: Eucalyptus

#4

Re: Eucalyptus

Dennis Bilevich PRESCOTT AZ

>Thanks John Nice bowl

Re: Eucalyptus

#5

Re: Eucalyptus

JimQ

>I was offered logs of Eucalyptus that were cut 2 days earlier down here in Phoenix. It dried so fast that the 15" logs had 1/2"+ splits in the center. I was advised that if it dries like that the rest will shatter like pottery. I don't know if sealing as fast as you can cut will save it here in PHX.

JimQ

Re: Eucalyptus

#6

Ric Taylor

Re: Eucalyptus

Ric Taylor

>I have some quilted Eucalyptus that I have used on several projects and in fact is mounted on my lathe right now. I have no problems at all with splitting. The surface has a lot of small pores, like oak but in a tighter pattern. But when it is finished, the depth and translucence of the grain is incredible. It's like standing at the edge of the water at the beach, and looking down through three inches of clear water to the rippled sand below. Just really beautiful.

Ric