Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Have a question? Ask Woody!

What would you do with cherry logs??

Posts

What would you do with cherry logs??

#1

What would you do with cherry logs??

Bill MacLachlan

>I was offered 2 cherry logs today that are supposed to be approx. 8" in diameter and 7 feet long. Of course, I said I would take them. The guy is asking $20.00 for the pair. We are to get together soon to cut them into workable lengths. How would you cut them? I was thinking 12-18" logs. What would you make with the wood? They almost seem to small to make bowls, if I cut down the center to eliminate the pith. Would you leave at the 8" diameter and work end grain?

Nice problem to have!! Thanks, Bill

Re: What would you do with cherry logs??

#2

Re: What would you do with cherry logs??

Bill Crommett

>Eight inch logs should be free.

Re: What would you do with cherry logs??

#3

Re: What would you do with cherry logs??

David Breth

>I would be very tempted to turn a few long stems with that (in addition to small bowls). Given the diameter of the wood, you might try a double-bullseye bowl and let'er warp a bit.

Re: What would you do with cherry logs??

#4

Re: What would you do with cherry logs??

Bill MacLachlan

>I don't disagree Bill. But these are not his logs. He got them from somebody else's woods. He does on the side as he is also my source for flat lumber, if I ever get back to that!! I think it is only "gas" money. He also says he has a burl for me. I do not know the size of it yet.

Re: What would you do with cherry logs??

#5

Re: What would you do with cherry logs??

Bill MacLachlan

>David, I don't know what you mean by "double bullseye".

Bill

Re: What would you do with cherry logs??

#6

Re: What would you do with cherry logs??

Ed Kelle

>You can make, mugs, goblets, vases, ornaments, letter openers, paperclip cups.... lots of things. Yes I have used small cherry logs a lot. At 8" diameter, cut them at about a foot unless you have long spindle projects you want. This will still leave extra room for checking for any bowls. Have fun!

Re: What would you do with cherry logs??

#7

Re: What would you do with cherry logs??

Rick Davenport

>Lucky you.

That size is just perfect for my mini lathe.

I have done a bunch of natural edge bows with pieces that size.

They turned out just great.

I've included a picture.

It's about 4" in diameter.


img

Re: What would you do with cherry logs??

#8

Anchorseal it real...

Clem Wixted

>...fast after you cut your pieces. Cherry will check and crack very quickly.

Clem

Re: What would you do with cherry logs??

#9

Re: What would you do with cherry logs??

Mike Schwing from Md.

>Around here 8" cherry logs are firewood. But they may not be everywhere so I understand their value.

What _I_ would do with 8" logs is make spoons, forks, bugs, and eyepods. Cherry carves right nice.

What others may do with 8" logs is make 6" wide hollow forms, pith right down the middle, or slightly sideways. Small sets of matching cereal bowls would be nice for a family gift next Christmas. Cherry also keeps the bark on well for natural edged work. Now is the right time for working with natural edge stuff since the sap is in the roots this time of year.

Re: What would you do with cherry logs??

#10

Re: What would you do with cherry logs??

Bart Rhoads

>Bill If it was me, I would cut a little off each end of both logs to get a nice clean end and seal them real good. I would not cut them up into smaller pieces. I would store them under cover and just cut off what I need and then reseal the ends. If you cut them in to pieces you will have to seal all the ends and they will tend to check quicker.

Bart

Re: What would you do with cherry logs??

#11

Re: What would you do with cherry logs??

adrien

>tool handles, small vases (end grain type), candlesticks, small bowl�face grain and end grain, pens, knickknacks�$20 to deliver them ain't too bad.

Re: What would you do with cherry logs??

#12

Re: What would you do with cherry logs??

JKJ

>I sometimes cut smaller logs into spindle blanks and turn tops, wands, gavels, etc. For this, I need the wood dry. I cut the logs into turning squares on the bandsaw, seal the endgrain and an inch or so up the sides with Anchorseal, then let them dry for a few years.

The book Turning Green Wood will give you lots of ideas of what to do with small logs and branches. BTW, a club member here cautions to turn green cherry as soon as possible after cutting. I personally don't have any experience with green cherry.

If you come through East TN, I'll fill up your trunk with small cherry logs if you will use them on your lathe. They grow like weeds around here and I need to thin some out. I've been splitting small cherry, walnut, sassafrass, locust, persimmon and others for firewood.

JKJ

Re: What would you do with cherry logs??

#13

Thanks for the ideas guys.

Bill MacLachlan

>

Re: What would you do with cherry logs??

#14

Re: What would you do with cherry logs?? *LINK*

David Breth

>I mean a bowl that is pith-inclusive. You turn the bowl in the traditional orientation, but you've got pith on two sides of the bowl, which resemble a bullseye. I did this one time on some white birch that was narrow diameter and it looked pretty cool. I'm sure that between cracking (from the pith) and warping (if turned green) you might have your hands full trying not to lose the piece, but if it worked out it could be pretty slick. There's a photo of a very nice double-bullseye on this link.

David B.


http://www.customwooddesign.com/turninggreenwood-1.html

Re: What would you do with cherry logs??

#15

Re: What would you do with cherry logs??

Rick Davenport

>David,

Thanks for that excellent link.

You hit the bulls eye.

It's EXACTLY what I needed in my ever expanding library of useful information.

Rick