Jet 1236 left side spindle thread size ?
Pete in Holland
>Searched the archives to no avail. What's the internal thread on the left side of a Jet 1236 spindle ?
Thanx
Knowledge You Can Build On — Est. 1998
Jet 1236 left side spindle thread size ?
Pete in Holland
>Searched the archives to no avail. What's the internal thread on the left side of a Jet 1236 spindle ?
Thanx
Re: Jet 1236 left side spindle *LINK*
Chuck Ludwigsen
>I have searched long and hard, grass-hopper. :-)
I have called jet, spoke to a guy who OWNS a 1236, and could not get the answer. I found a reference on this website that said it is something like 1/2"-12 LH. Which I understand is NOT the standard.
If you find out anything, please post it in bold.
Chuck in Memphis, TN
Re: Jet 1236 left side spindle
Ed in Leaside (Toronto, Ontario)
>Could it possibly be an M14-2 LH? M14-2 is a standard metric size thread, with dia of .551" and 2mm pitch is very close to 12tpi. I'll try using a piece of 1/8 dia solder to take an impression of the thread pitch on my lathe tomorrow.
Re: Jet 1236 left side spindle
Ron in Drums PA
>The 1236 has a 1/2" reversed thread.
WHL has a handwheel the fits the Jet 1236. I have one and glad it is installed.
Re: Jet 1236 left side spindle
John Lucas
>Ron does your handwheel have a hole for the knockout bar? There is a thread going on in the AAW forum about a lady not able to get here drive center out. She is also having trouble getting the handwheel off. Here handwheel doesn't have a hole for the knockout bar. I had assumed the thread was left hand and you say that's correct.
Re: Jet 1236 left side spindle
Ron in Drums PA
>No the handwheel doesn't have a hole for the knockout bar, and unfortunately there is not enough meat on by the threads for me to drilla 3/8 hole for my vaccum chuck. It is a PITA but I find myself happy that there is a handwheel