Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

Ellsworth Workshop...anyone been?

Posts

Ellsworth Workshop...anyone been?

#1

Ellsworth Workshop...anyone been?

David Galloway

>Three friend and I are going up to David Ellsworth place in Pennsylvania for a four day hands on workshop. I have watched his tapes and have seen him on occasion. I would be very interested if there are those of you can share your experiences, here or in a private email, of how he approaches this time. I know I am going to have fun cause I'll be turning, and being with three of the best folks I know. I want to maximize the learning time.

Thanks in advance,

David

Re: Ellsworth Workshop...anyone been?

#2

Is that a gloat or What?

T Daniel

>

Re: Ellsworth Workshop...anyone been?

#3

Re: Ellsworth Workshop...anyone been?

Barry Irby

>My son and I did an Arrowmont session with David and aoubt fifteen others. You will be turning and there with FOUR of the best people you know. I'm sure you will add David to your short list. Have a good time.

Re: Ellsworth Workshop...anyone been?

#4

Re: You will feel right....

JamieDonaldson

>... at home with David- I did a workshop at his studio in 1990 and have many good memories. He is very laid back most of the time, and his techniques are timeless. He is quite the turning philosopher and can discuss just about any subject at any level. Tell him that Jamie said hello!

Re: Ellsworth Workshop...anyone been?

#5

Steven Antonucci

I'm going in May.

steve antonucci

>Never been, but will be there in May. Wondering who else is in "my session" -May 26-29?

Re: Ellsworth Workshop...anyone been?

#6

Re: Ellsworth Workshop...anyone been?

W.C. Turner

>When are you going, DG?

Re: Ellsworth Workshop...anyone been?

#7

Not even thinly disguised!

RevDoug

>

Re: Ellsworth Workshop...anyone been?

#8

With friends, I attended the four-day class...

Ted Owen, Pittsburgh

>and it was a very worthwhile experience. David will cover the mechanics to the extent you require, just ask for whatever you wish to learn. And he explains why he does what he does. That was particular helpful to me, because I attended as a near-novice, quite unlike my very experienced friends.

He also teaches design and philosophy, much more than can fit on the helpful video's--all of which I own and have viewed more than once.

Most importantly for me the visit changed how I view the world. I've always been a step 1-2-3 type of person, both in my profession and to a large extent in my personal life. But David views the world differently--sensing the beauty in all things and trying to nurture. From time to time I now try to reflect upon that feeling.

Best, Ted

Re: Ellsworth Workshop...anyone been?

#9

Re: Ellsworth Workshop...anyone been?

Dennis Y

>David, I attended his workshop last October. You start out on Thursday evening with a get together and shop tour of about an hour. The main house is a museum of all varieties of art, especially of the turned wooden variety. Friday starts in the shop with general intro and discussion of your goals and expectations from the class. Over the next three days you will turn various bowl forms with David overseeing. He will offer pointers both individually and as a class. It is truely remarkable what this soft spoken man can do with a gouge. He will help with form and technique questions. Daily there are three great meals and talks around the table about the days activities. The day will run into the early evening. The time will fly-by so quickly. Most of what I learned was in the small techniques that have made such a difference since I returned home. You will not regret the trip in the least. If you are coming back to the Florida Symposium at Lake Wales this weekend I would be happey to set down and talk some more. Dennis

Re: Ellsworth Workshop...anyone been?

#10

It will be wonderful...

David Propst

>I have been to David's in 2002 for the class you are taking and to a weekend class at Arrowmont this year. He is an incredible teacher and one of the nicest and most interesting folks you could hope to meet.

Best Regards,

David

Re: Ellsworth Workshop...anyone been?

#11

A Strong Suggestion, Grasshoppah,

Mark Mandell - Gone Round In Jersey

>Be a field of untracked snow, a pure blank page, a clean slate upon which he can write. Leave all you have learned and all the videos behind, focus only on what he tells you, do not try to fit what he does into your prior methods, and then just RELAX and turn the wood. Do this and you'll leave on Sunday afternoon with more than you can currently imagine.

Same advice I gave Keith Tompkins. He can chime in as to how well it works.

Mark

[been there twice]

Re: Ellsworth Workshop...anyone been?

#12

Re: A Strong Suggestion, Grasshoppah,

James McClure

>That is terrific advise that Mark gave. Go in with a clean slate. I went last June and had a phenomenal time and it was a phenomenal learning experience.

On the first day we were turning bowls and David came over to check my progress. I was hollowing out a bowl and he ran his hand through the bowl and said there was a flat spot on the bottom. So, I proceeded to tell him that I liked to have a flat spot on the bottom of my bowls. In his kindness and grace, he said well why not try for a continuous curve on the bottom of this bowl just so that you know you can do it. I did, had haven't turned a bowl with a flat spot in it since.

Other suggestions... He doesn't mind if you take pictures, so take lots. He doesn't mind if you sit in the Maloof rocking chair so sit and relax (although I would ask first just to be polite). And he doesn't mind if you ask questions so ask plenty.

Re: Ellsworth Workshop...anyone been?

#13

Keith Tompkins

Re: A Strong Suggestion, Grasshoppah,

Keith Tompkins

>HI Mark, I won a scolarship to attend a school of my choice, and I chose David Ellsworth's school. My reasons for attending were a bit different than most turners, but I certainly didn't want to hear another technique-driven session.

I think you need to go as a clean slate, as Mark suggests, because sometimes we hear only what we want to hear, and ignore the parts that make us uncomfortable. If you are willing to really listen to what David is saying, it just may change the way you turn...not just the technique, but the way you approach the craft.

Re: Ellsworth Workshop...anyone been?

#14

Re: A Strong Suggestion, Grasshoppah,

David Galloway

>This is exactly what I was hoping to get. Thanks for all the input. I will try to find my "beginner's mind" and be open to the experience.

By the way, was up for a meeting at John C. Campbell and stopped by the woodturning shop to check in with Al Stirt. What a teacher! Everyone there was having a blast....one literally with a bowl.

We have approved the groundbreaking of the new Willard Baxter Woodturning Studio and it should begin shortly. This will be a huge improvement to the capacity of JCC. Hope to see many of you there.