mini grinder advice please
ken chase
>I wish to add detail to my turnings and plan to purchase a mini-grinder.
Don't know which is the best choice between Proxxon, Arbortech and Merlin. Opinions and imput will be appreciated.
Knowledge You Can Build On — Est. 1998
mini grinder advice please
ken chase
>I wish to add detail to my turnings and plan to purchase a mini-grinder.
Don't know which is the best choice between Proxxon, Arbortech and Merlin. Opinions and imput will be appreciated.
Re: mini grinder advice please
Ed Kelle
>I had the Merlin, note HAD. I went thru 2 of them. Each lasted about 6 hours total use and developed the same issue, motor would run but head would not. Shaft end of the tool gets hot pretty quick also. Got them thru Woodcraft and they knew exactly what the issue was, told me that they have a design flaw, and they would not be carrying them any more. Yet I still see them in this week's flyer.
I was very easy on mine, especially the second one knowing what happened to the first one. Still the same result. Lots of people seem to use them so I don't know if both of mine were part of a defective batch. If I knew it would hold up, I'd get another because it is a nice tool. I might try again in a year if I see the quality has improved.
Re: mini grinder advice please
Bill Crommett
>Ken: My minigrinder is a cheap import that has given me good service. It is attached to an Arbortech 4 tooth carbide grinder blade that has been used enough to just about need re-sharpening. I think I spent $19.95 for the grinder, and I suspected that it would not last so I bought a replacement while the price was right. It is still in the box, and the local import tool vender just advertized a 4 1/2 grinder for $6.95. (yes, six-ninety five) tempting, but good sense tells me why do I need two replacements on the shelf in boxes.
Bill
Re: mini grinder advice please
Eric
>Linkey to this importer???