Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

demo list

Posts

demo list

#1

demo list

John Lucas

>We are having an officers meeting of our local club and I need to make up a list of demos for the year. We don't have enough money to bring in big names so most of the demo's will be in house people. What kind of demos do you all like to see or think that a small club should do.

Re: demo list

#2

Re: demo list

T Daniel

>John, our club is mostly beginning turners so this affects what they want to see of course. We always have a lot of positive comments when the demo is on how to use a particular tool or technique or when we show "how to" make a particular item. Sometimes we use more than one club member to show alternate ways to do the same thing. We have done goblets this way and it was a good meeting. We have also done a meeting showing how to start a bowl from between centers as well as from a faceplate. We do not emphasize a "right and wrong way", just alternate ways. Pepper Mills are a good demo as well as Christmas ornaments at the appropriate time of year. Projects make good demos. Hollowing techniqes can be broken down into several demos starting with small items with basic tools and progressing to captured rigs. Finishing again is one that is best done by several club members; one doing lacquer, another doing oil, etc. Involve as many club members as possible.

TD

Re: demo list

#3

Re: demo list

John Lucas

>Thanks Terry. I do intend to try and get more members involved in doing a demo. One of the problems we have is having 4 really top notch turners in the club. It's way to easy to fall on these guys for demos because they are so good and the club loves them. I'm going to try to limit that this year if I can. I don't want to tire these guys(and girl) out.

Re: demo list

#4

Re: demo list

Wally Dickerman in Arizona

>John, our local club is only a year old. Most of the members are beginners and intermediate turners, so almost anything pertaining to turning is interesting to them. Last month I did a presentation on sharpening turning tools. I brought in my grinder and my 1-inch belt sander, which I use for reshaping tools. I invited members to bring in tools to be sharpened and reshaped if necessary. I spent about an hour and a half demonstrating and discussing sharpening. Everyone seemed very interested.

This month we're having a demo by one of the members on pyrography in woodturning. I'm looking forward to it.

I plan on a demo on form and design in woodturning. I've done this before in a couple of other clubs that I've belonged to. I've brought in well known potters and gallery owners for a general discussion on form. We invited members to bring pieces to be critiqued. Turned out to be a popular demo.

Wally

Re: demo list

#5

Re: demo list

John Lucas

>Wally I definitly think a sharpening demo and basic bowl demo should be done each year. We get a fair number of new people each year and some of the more recent members probably need to see the demo again.

One problem I have as a program person is how to keep it interesting for the advance people such as yourself. As I said earlier we have about 4 or 5 that are near that level. For a group of only 30 that's pretty amazing. 2 of them could easily be on the national level but have no desire to be there.

Re: demo list

#6

Re: demo list

John Lucas

>One demo I think I'm going to lead is to have all the members bring thier favorite gadget or tool and share it with the others. I know we are all gadget freaks so that one should be fun.

Re: demo list

#7

Re: demo list

Duane Hill

>John, one demo that we had recently that went over very well was several "short" topics. We had topics on hints, dust collection ideas, hearing protection, etc. We had about 8-10 people with short tidbits and each was limited to 5-10 minutes. We have been asked to do it again. This allows several people from the club to get involved.

Re: demo list

#8

Re: demo list

Wally Dickerman in Arizona

>You're right John, keeping turners of all skill levels interested in a demo is difficult. I feel that a demo should be aimed at the intermediate turner. Ask for questions frequently. One way to keep the experts happy is to get them involved by asking them questions about their take on a particular point in the demo, or by answering a question from the audience, then asking one or two of the experts for their take on the question. It's surprising how often the experts will all have a different way of doing things.

Wally

Re: demo list

#9

Re: demo list

bob davis

>our kc club has done thi and it was well received

Re: demo list

#10

good idea, I'll put that down.

John Lucas

>

Re: demo list

#11

Re: demo list

Chip Peterson

>John, The officers of our newly recognized club (Michigan Ohio Woodturners) recently went though this same exercise. I'm in the same office as it sounds like you are, and it is very hard to plan demos that will be appropriate for all experience levels.

We went through the bowl turning/sharpening/hollowing ideas and made a list. However, as as result of someone's response from right here on WC, we added a new topic.

I had asked about critiques. I want to drag people into commenting about my creations without the usual "nice" comments. Anyway, someone mentioned that they have had artists from outside the woodturning world come to meetings and talk about correct forms and design. So that's what we are doing. We have a ceramicist (sp?) from the local college coming and presenting.

Just another thought.

Re: demo list

#12

Re: demo list

Chip Peterson

>Oops, I guess Wally just said the same thing! Great minds...?

Re: demo list

#13

Re: demo list

Ken Grunke from SW WI

>John, our club couldn't afford big names either if we didn't charge extra for them, and most members are willing to do that. I think David Ellsworth cost each member $45 if I remember, of course a big part of the group wanted to see him so that worked out good. Depends on the size of your group, of course. Recently our board members decided to let some of the general funds cover any overage costs of an occasional demo if the fees ended up being too high per member. We usually pay $35 ot $40 each for a big hat turner (not a turner of hats, although I'd love to have JoHannes Michelsen demo!)

Speaking of big hats, we'll have Bill Grumbine in April--woo hoo! :)))

Bill if you see this, I know you don't consider yourself a big hat, but I do!

Re: demo list

#14

Re: Make some tools, then....

JamieDonaldson

>... demo how to sharpen and basic uses. Many beginners want to make simple hollow forms because the variations are endless, and a variety of inexpensive home-made tools are a good way to start down a new tool path.

Re: demo list

#15

Re: demo list

JKJ

>John,

You graciously came and demoed at our club (I'm hoping for a return visit), so perhaps one of our members could make the trip to yours. I'm thinking of a few interesting demos we've had, one on turning dippers/ladles with long handles - I suspect the guy would be willing to drive out your way. We also had a very interesting demo by a local guy (not a club member) on metal spinning. I could try to get contact info if you are interested.

JKJ

Re: demo list

#16

Re: Make some tools, then....

Bob Hackett(Mainely,Bob)

>The toolmaking demo for our club is an annual event.We usually hold it on a saturday because we need all the time we can get.

This last demo we made toolrests.Other years we made hollowing tools,scrapers with brazed HSS tips,hook tools,etc.

We usually divide into groups of folks who want to make the same tools and then each person handles a step of the process till everybody has a complete tool.

It takes alittle planning to get the material ordered and enough things like taps,angle grinders,torches,etc for all the stations but things usually go smoothly.

The stations that handle brazing and forging are usually a big draw so you may need someone to herd all the participants back to thier stations from time to time.

Make sure you have extra safety glasses,heavy gloves and ear plugs on hand too.

Mainely,Bob

Re: demo list

#17

Re: demo list

John Lucas

>Ken We also have outside demonstrators but usually we invite the turner and then divide the cost among those who want to see them. This way the members who aren't interested in that sort of thing don't feel like thier money is going to something they don't want. So far our individual cost have only been $25 or lower. we try to catch turners who are traveling through so the traavel expense is minimal.

Re: demo list

#18

Re: demo list

John Lucas

>John I'll be coming your way on the 17th. I'll be doing a demo on photographing your work. I'll be excited to see how the club has grown and glad to see you. Hope you'll be there. Based on the newsletter you have quite a few new members and the quality of work has definitely improved. Hopefully I'll have some new work to show you. I'd love to see if the metal spinning guy would come up.

Re: demo list

#19

Re: demo list *LINK*

Ken Grunke from SW WI

>I guess that's what I was trying to say--only the interested attendees pay. We do it pretty much the same as you.

BTW, if you ever plan on coming to or near SW Wisconsin, think about doing a demo for our club. There are at least three AAW chapters in the region. I think this year is getting close to being filled up but '07 is clear as far as I know. Pam Reilly is our program director and contact person.


Coulee Region Woodturners