Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

And now for something completely different...

Posts

And now for something completely different...

#1

Steven Antonucci

And now for something completely different...

steve antonucci

>Picked up some red dye at the wood show last month, and decided that this oak crotch bowl wasn't any good for anything but experimenting. As you can see, the cracks have gone through and I haven't spent a bunch of time with the sanding. Just thought it might be of interest, since some folks have asked if oak is any good to turn...

For those of you that do turn oak, (especially white oak) how do you seal the pores?

Steve


img

Re: And now for something completely different...

#2

Re: And now for something completely different...

John Lucas

>Steve One of my favorite coloring techniques is to dye the piece red and then rub either Cordovan or brown shoe polish over it. It make the red go burgundy and it fills in the pores. If you don't want it to go burgundy seal it with shellac or lacquer and then rub in the shoe polish. This looks especially good on woods like Oak and Ash.

Re: And now for something completely different...

#3

Richard Allen

Re: And now for something completely different...

Richard Allen

>I have sealed White Oak with epoxy. When the surface epoxy was sanded off the and an oil finish applied the bowl had a very sensious feel.

Re: And now for something completely different...

#4

Re: And now for something completely different...

Ken Grunke from SW WI

>Steve, to fill the pores, wet sand with fine grit with whatever finish you'll be using on the bowl. Not too good for lacquer, but great for oil finishes.

Re: And now for something completely different...

#5

Re: And now for something completely different...

JKJ

>Speaking of dye, did you read the recent blurb in one of the magazines of a company putting dye into the living tree through the roots? This can make some astounding figure deep inside the wood, not just on the surface, an interesting potential cure for the bland wood syndrome.

This company claims it will have a product ready soon. Funny thing, I read about this technique in a "how-to" article back in the '60s or '70s.

JKJ

Re: And now for something completely different...

#6

Re: And now for something completely different...

Dick Parr

>John, Keith Burns over on SMC has posted a couple of turnings he has done in the last couple weeks using this wood. They are beautiful.

Dick

Re: And now for something completely different...

#7

link?

GaryG in MD

>