Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

Turning exchange?

Posts

Turning exchange?

#1

Turning exchange?

Ernie Miller

>Ok so I said I would play. I thought we were to send the turning out the week of the 16th? did I mis a memo? So here is the deal I went out and dug the lathe out of the corner of the garage/Power tool shop. Haven't been out there in at least a couple years. I found the lathe it was stuck back there by the wall behind all that wood and boxes from estste sales. but dang if I can find my face plate? I know it is here some where and it has a big chunk of walnut mounted on it. But I don't want to use walnut any way. I want to use this spalted pear crotch I have been saving. So I twist this thing around on the lathe for a while and I get an OK shape do a little sanding and flip it around and put it in the chuck a bought and never got around to using. So I start to clean out the inside and Bam! the damn thing flys off the lathe? what is up with that? There is a nice pretty bruse in the side. So I chuck it back up and go at it a bit more so far so good but I have a ways to go. I'm not to good at this round stuff are you sure that you would rather not have a china hutch made with hand tools? I'm sure I could get that built by the 16th but turning a bowl might not happen. I'll probably send a nice chunk of wood to the poor soul who got the short end of the stick when I drew there name. so they will at least get somthing worth having. I'll give it another shot this weekend but making a Slegh bed would be easier. how about that instead? I'm sorry if It was suposed to be to you by now and isn't. and don't expect any thing like has been posted so far. I might have to dig somthing out of the closet from when I did this more often.

Re: Turning exchange?

#2

Re: Turning exchange?

RussFairfield

>Nothing ever workas out as planned. A nice piece of wood as a DIY kit would be welcome by almost anyone here.

Re: Turning exchange?

#3

Re: Turning exchange?

RussFairfield

>There was also a fall-back position in Davids original message to announce the exchange. And that is to notify him if we can't deliver.

Re: Turning exchange?

#4

Re: Turning exchange?

David Breth

>You're making me feel better. I'm doing my level best on a bowl for the exchange, and I think it is pretty slick, but it pales in comparison to what I've seen posted as exchange gifts thus far. My wife likes it for what that is worth.

David B.

Re: Turning exchange?

#5

Re: Turning exchange?

Ernie Miller

>No I am going to deliver! I'm thinking a Lighted display cabinet with glass shelves to display what they turn. I'm thinking Mahogany I will put a couple turned Finnials at the top so no one acuses me of cheating.

Re: Turning exchange?

#6

Re: Turning exchange?

Ernie Miller

>You wife love you she will say any thing to make you feal better. I'v been maried for a while I know these things. My wife told me you know you have a bunch of bowls back in the closet that are nice.

Re: Turning exchange?

#7

have faith ...

e

>...that the receipient will cherish the thought, energy and care you put into your work ... isn't that the point of the exchange?

Re: Turning exchange?

#8

Re: have faith ...

David Breth

>That's what I'm depending on, and that's why I'm doing level best. I've been turning 1 year this month, and have moved up the curve considerably during the past couple of months. Hopefully this bowl will reflect that.

Hey, the bowl will hold "stuff", guaranteed, and isn't that the point of a bowl?

David B.

Re: Turning exchange?

#9

Blackmail?

T Daniel

>Actually, we are collecting pieces so that when you get better we can blackmail you with this one; you'll give 3 bowls in a couple of years to get this one back.:)

Re: Turning exchange?

#10

Re: have faith ...

Ernie Miller

>I don't know about that I turned a vase type of thing for a frend that was leaving work out of burl and it had inclusions and holes in it She still complains about tha vase I gave her that won't hold watter. she uses it for a pen holder on her desk and loves it all the same. Some holes are good.

Re: Turning exchange?

#11

Re: Turning exchange?

Doug Trembath

>Ernie, I have been facing some of the same dilemma. I have decided to send pieces that I turned in the past, in fact one has been on my "Display Area" in the living room for years, but it displays all the techniques and wood knowledge I have. I simply have been too busy on the "flat side" to do much turning.

You should not feel too bad about sending anything at all, since we have folks of ALL levels sending stuff out, so it doesn't count as a contest, just a bunch of friends sharing who and where they are in woodturning. Mine will be in boxes soon, and to the USPS as quick as I make a run to town.

Don't give up, my friend.

Doug Trembath

Studio in the Woods

Re: Turning exchange?

#12

Our "Early Work"

Jack Savona

>David, if you have any concerns about your exchange piece, perhaps you can think of it this way: it's a collector's item. Can you imagine someone having a VERY early piece from Bin Pho, Richard Raffan, David Ellsworth, Keith Tompkins, etc.? It would be a real treasure and make you want to purchase a current piece to display next to it.

So I guess you could think of this exchange piece as the seed of a future sale ;-).

Seriously, at one point in their life, all those turners we all admire were right where we're all at now. Considering who we are and what our experience is, we're all right where we should be. It's only and all about getting better.

Re: Turning exchange?

#13

The check is in the mail

Raymond Overman in SC

>or at least it will be by Monday. Don't feel bad Ernie. All I've done up to this point is round work and I've had a heckuva time getting something that I felt good about out. Luck would have it that I drew a turner that far outclasses my experience and I wouldn't want to send off a second rate piece for the trained eye. I'm sure they won't publicly denounce my work but it's still hard to commit.

Unfortunately, my thoughts of sending a truly gorgeous piece of dogwood that I turned into a hollowform vase have been curtailed since it decided to tie itself into a knot despite Dave Smith's alcohol and my slow drying methods. It's not ugly by any means but it ain't round either. I don't want the recipient to think that it's not a turning. I was told by a professional turning friend of mine to go ahead and finish it and send it on as an artistic piece. He said he would be proud to own it and thought that the execution, the woodgrain, and the wood movement complemented each other. It may still end up in the mail.

Well, it's a choice between the dogwood, a small cherry closed form, or a carved and scorched hickory piece. Each time I look at each piece I find something about them that I'm not quite satisfied with but I know that any of them would be well recieved by my local friends, family, or customers.

Good luck with finding the right piece that you're comfortable with. For me, it will be a test of my will not to doubt myself once the package is in the post.

Re: Turning exchange?

#14

Re: The check is in the mail

Carole in VA

>Raymond,

Are we EVER satisfied? I know I am not. But then that's what makes us strive to get better. :)

Re: Turning exchange?

#15

Re: The check is in the mail

Raymond Overman in SC

>Maybe I'll send you some pictures and let you choose then Carole. That way it's not my fault!

Re: Turning exchange?

#16

Re: Turning exchange?

Molly Winton

>Speaking from a purely selfish perspective, I like the idea of a 'flat' piece that has a turned component. I am truly in awe of flatworkers work. I think I have a good ability to turn a nice form on the lathe, but good heavens don't ask me to do anything flat! I'm with the rest of the folks, your efforts are what will be recognized and cherished. This is definitely not a competition. I hope you drew me!.....wait, I said that to Carole too.....Oh well I'm a greedy little cuss!

Re: Turning exchange?

#17

Re: Hey Folks!!

RussFairfield

>This ain't a contest. It is about exchanging something we made and thereby sharing a part of ourselves with another woodturner.

Always remember that wood is wood, and sometimes it acts like wood. Besides, the benefits of a warped form is that it can be rotated around until you find something you like.

I have a few from the early years that look pretty grim. But I cherish the memories that are in every one of them.

Re: Turning exchange?

#18

Re: Hey Folks!!

Raymond Overman in SC

>Russ,

None of my pieces compete with anyone elses. It's similar to my golf game. I'm competing with myself and want to represent myself the best way I can. My post is about an inner battle, not a external competition.

Anyone would be more than happy with an original Ernie Miller, Russ Fairfield, or for that matter hopefully an original Raymond Overman.

Re: Turning exchange?

#19

Re: Turning exchange?

Pat Mulligan

>A nice piece of wood would make me happy.

Re: Turning exchange?

#20

Re: Turning exchange?

Carole in VA

>LOL! I was going to send you something just for the heck of it, but now that you've revealed your fickle side... ;))

Re: Turning exchange?

#21

Keith Tompkins

Re: Our "Early Work"

Keith Tompkins

>Thanks for the compliment Jack, but I don't think I'm quite there yet....still plugging away! You may not want one of my early pieces! I have one early piece that fell out of the ugly tree, and hit every branch on the way down. I use it in my demos as an example of how anybody can improve.

Re: Turning exchange?

#22

Re: Our "Early Work"

Jack Savona

>Any turner who's "there", needs to dismantle the lathe and holster his/her tools.

Re: Turning exchange?

#23

Oh Doug...did you get yours yet???

KurtK in Indy

>

Re: Turning exchange?

#24

Re: Turning exchange?

Scott Hogsten

>I understand your pain. I came into the exchange late, then the day after I sent my name in I tripped over my own two feet and cracked a bone in my right hand and bruised it severely. Then I caught a cold/cough that put me in bed for a week. Finally got out to the shop early last week and turned out a really good piece. Good enough that it really demanded a good finish. The first coat of finish had major issues. Had to sand it back down. However it is finally starting to look the way I want it to. I think by Monday/Tuesday it will be ready to go. Whoever has my name don't worry get it to me when you can and whatever you can do I know it isn't easy.

Scott Hogsten

Re: Turning exchange?

#25

Re: Our "Early Work"

Norm

>Dang, how did I miss out on this one? Anybody planning another exchange in the future?