Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

Plagiarism, Fess�in Up!

Posts

Plagiarism, Fess�in Up!

#1

Plagiarism, Fess�in Up!

George Van in WI

>I know this has been done before so I guess I cannot take credit for originality in technique or execution however somehow that idea did not make me feel better when my last piece of walnut, 6�x7�, left the lathe. Unkind words were spoken! I was surprised how quickly the 3/16� straight bit can cut; this lesson will make me be more careful in the future.

Sorry for venting but I now feel better and will try another tonight after chores. George


img

Re: Plagiarism, Fess�in Up!

#2

Re: Plagiarism, Fess�in Up!

Ad de Crom Netherlands

>George, this is bad luck.

I guess you always do the outside first, and than the inside?

Try it the way around, roughly oversized the outside and than the inside, good idea, or not?

Anyway this is my way of working

Re: Plagiarism, Fess�in Up!

#3

Re: Plagiarism, Fess�in Up!

JamieDonaldson

>Remember that old plagarised saying "measure twice,then cut once!"

Re: Plagiarism, Fess�in Up!

#4

Steven Antonucci

from my "Five Hours Wasted for Nothing" Series

steve antonucci

>I can't lay claim to being the first to do it, but I can cut through a sidewall with the best of them! I feel your pain... (Clinton?)

Steve

Re: Plagiarism, Fess�in Up!

#5

Re: from my "Five Hours Wasted for Nothing" Series

Phil Powell

>George,

Last week I orbited a beautiful piece of pine burl accross the studio. I

had rough turned it months ago. Waited.....waited......waited some more.

Mounted it in a chuck, turned on my lathe, touched it with a sharp gouge

and the damn thing took off accross the room at 80 mph. It hit the wall

and at that point left this world for good. Losing a bowl isn't that unusual

for me, but this wood was so damn nice! I'm sure I've copied someone.

Back to the wood lot.

Re: Plagiarism, Fess�in Up!

#6

Re: Plagiarism, Fess�in Up!

George Van in WI

>I will give your way a try Ad. Either way I think I should follow Jamie's advice on measuring. I know to do it on flat work but I thought this stuff was "Magic".

Re: Plagiarism, Fess�in Up!

#7

Re: Plagiarism, Fess�in Up!

Rick in Colgate, Wi

>Look on the bright side George, walnut does burn nice in the fireplace!

Re: Plagiarism, Fess�in Up!

#8

Re: from my "Five Hours Wasted for Nothing" Series

David Breth

>I busted something up last week, except it was unbelievably stupid and I knew it was stupid when as I was doing it. Worked on an end grain vase, box elder, a piece of wood I saved almost from the week I started turning. worked on it for hours, had the shape I wanted, hollowed out as deep as my tools would go. Pulled out the tool rest to do some sanding, but then decided "you know what, I'm going to run the scraper up the inside just to clear out the wood dust before I go at it with the sandpaper. Who needs a tool rest for that???" Apparently, I need a toolrest for that, because if you don't use a toolrest for that (and anything else), the scraper finds the first edge it can, digs in, leaves your hands, cracks the vase in half while it dings around in there, and leaves a bruise on your dumb-@ss ribs when it comes flying back at you before it hits the floor. Moronic. I can't even claim it as a lesson learned it was so dumb.

On the plus side, I did learn that my wall-thickness was pretty consistent going down the length of the vase.

David B.

Re: Plagiarism, Fess�in Up!

#9

Re: Plagiarism, Fess�in Up!

Todd O. Cronkhite Maine Native now in Jax Fl.

>Nothing is for nothing. We learn from our mistakes, so we do get something out it, and if CRS kicks in and you do do it again the overwhelming case of Deja-vu that you'll get can be quite enjoyable to fiqure out. ;~)

Hmmmmmmmmmmmmmmmmmmmm haven't I seen this before? Did I do it? Did my buddy at the last turner meet do it? Did I see it on a tape? Did I dream I did this before? Hmmmmmmmmmmmmmmmmmmmmmmmmm?

Todd O.

Re: Plagiarism, Fess�in Up!

#10

Re: Plagiarism, Fess�in Up!

Paul in Phoenix, AZ

>I did the same thing last week at a public demo. One guy told me he already knew how to that but wanted to learn how not to go through the side. It was a really nice piece of carob too.

Re: Plagiarism, Fess�in Up!

#11

Back to the woodlot

George Van in WI

>Speaking of back to the woodlot, I am getting a lot of turning wood while logging Phil, but no pine burls on the woodlot that I know of. I did find some nice spalted hard maple and a nice veneer black ash that will not go to the mill. I will bring a couple of pieces to the next meeting.


img

Re: Plagiarism, Fess�in Up!

#12

Re: Plagiarism, Fess�in Up!

George Van in WI

>But Rick, it was the last piece that you gave me, not just something off the woodlot!

Re: Plagiarism, Fess�in Up!

#13

Re: from my "Five Hours Wasted for Nothing" Series

George Van in WI

>Gosh David, I will not copy YOUR method. I�m glad to hear you weren�t seriously hurt! If you view Raffan�s tape he has an easier method for halving a bowl.{:>)

Re: Plagiarism, Fess�in Up!

#14

Re: Plagiarism, Fess�in Up!

George Van in WI

>I was at a demo last year where two objects were destroyed; it was then that I knew I was watching a true turning demo. Although it was too bad one of those nice pieces of carob you use was lost.

Re: Plagiarism, Fess�in Up!

#15

Re: from my "Five Hours Wasted for Nothing" Series

David Breth

>I don't think I will copy my "method" either. Again.

Re: Plagiarism, Fess�in Up!

#16

Re: Plagiarism, Fess�in Up!

Mac

>Hi Todd, Do I remember that you once did a Nessie and put it in a show up here?

Re: Plagiarism, Fess�in Up!

#17

Keith Tompkins

Re: Plagiarism, Fess�in Up!

Keith Tompkins

>Paul, I was turning the piece of sumac you sent...had a violent migraine. Deadline...had to do it. I was making a suspended piece; a hollow form with four legs. my new rest, which threads onto the post came loose(unthreaded itself) and swung outward into the revolving wings...BANG! End of tuning ...trying to keep my wits, I attempted to withdraw my gouge from the turning....ended up slicing my left hand when it hit one of the remaining wings and bounced. It happens to us all, I think. I'm gonna weld the rest....

Re: Plagiarism, Fess�in Up!

#18

Re: Plagiarism, Fess�in Up!

Todd O. Cronkhite Maine Native now in Jax Fl.

>Well Mac, you remember it anyway you chose, but it wasn't meeeee. ;~)

Ahhhhhhhhh how the mind plays tricks on us for our own protection eh?

speaking of Nessie, I heard on the radio the other day that she has officially been taken off of the endangered spieces list in Scotland.

Todd O.