14" Lathes - need opinions
Tom Johnson
>I'm looking at 14" lathes (under $1000). Does anyone have a brand and model they recommend?
Knowledge You Can Build On — Est. 1998
14" Lathes - need opinions
Tom Johnson
>I'm looking at 14" lathes (under $1000). Does anyone have a brand and model they recommend?
Used would be my choice
T Daniel
>There are plenty of good ole used lathes in this size. I would take a Powermatic 90 over any of the 14" lathes available. There are also some good 12" Generals to be had in your price range.
TD
Nova 3000 (used as well)
steve antonucci
>A lot of Nova owners are upgrading to the DVR (and the DVR XP) and it's a great lathe that sold for about $900 new. A used one would be great and youd get 16" over the bed, and as wide as 29" with the headstock rotated.
I have had a 3000 for 3 or 4 years and it's a great value.
Steve
Re: 14" Lathes - need opinions
JL
>Don't get the Delta 46-715 - unless you want to put a much steadier base on it. It is okay for spindle turning, but a bit underpowered for any big bowls. I don't know about the Grizzly lathes (G0462 and G0584). They are in your price range.
Re: 14" Lathes - need opinions
Tony
>Where are some good places to check for used lathes?