Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Price drop on over 1300 Rockler items

3-D Design course question

Posts

3-D Design course question

#1

3-D Design course question

Brian Hahn in SW Wisconsin

>Yesterday I discovered that a local college was offering an introductory course in 3-D design. The college is UW-Richland (a 2-year campus that is part of the University of Wisconsin system) and the course description is:

ART 112 Three-Dimensional Design

Investigation of the basic elements and principles of three-dimensional design; in the use of volume and spatial arrangement. Lecture-lab.

It is a 3 credit course (meets for 3 hours twice a week) and would cost about $600, possibly less if I can just audit the course. Plus I'd have to go through the admissions process and it has been 30 years since I graduated from college...

So my question is would this course be worth the time, effort and money for my woodturning hobby? Or would waiting for the AAW symposium and attending all of the design sessions be a easier and/or better option?

Thanks,

Brian

Wondering if he could still make the grade in college from Avoca, WI

Re: 3-D Design course question

#2

Re: 3-D Design course question

Mark Mandell - Gone Round In Jersey

>Brian,

From that description, I think you'll find the course more geared to sculpture as one of the "fine" arts as opposed to turning which is more likely to be viewed as a form of pottery and (somehow) a "lesser craft." I've little doubt you'll get more in Louie'ville, but you won't have the time, in 3 days, to internalize what you hear and see there.

I'll make an alternate suggestion that I've made to others. That is to go back to the course offerings and get yourself into a wheel-thrown ceramics class; you'll get way more out of the time in both design, form, texture, and coloring. Depending on course load, you may be able to audit with just the lab fee for cost, but take some of your turnings into the instructor at the start and relay to him/her what your goals are. You'll likely get a warmer reception than in the sculpture studio.

Mark

Re: 3-D Design course question

#3

Re: 3-D Design course question

John Lucas

>Brian They teach 3D design at our school and it is great. I have never been able to take the class but I've worked with a lot of the students who do take the class. It's pretty deep and takes a lot of hard work but If your class is anything like this one it would be great.

That does seem like an awful lot of money however. You could buy a lot of books and videos for that but there's nothing like hands on with instant instructor and student critic's to help you learn. The down side is that some students don't like learning this way and if that were to happen to you it would be a bummer. So if the instructor is good I think it would be a really great learning experience.

I will have to agree with your other suggestion. Take the $600 and go to the AAW symposium. You will learn much more about woodturning design by going to the classes and by looking at the instant gallery than you will in an Art class.

Re: 3-D Design course question

#4

Thanks Mark

Brian Hahn in SW Wisconsin

>Thanks Mark,

I was hoping you (or someone with your background) would respond.

I can get a continuing education pottery course from the technical college in Madison WI for a fraction of the price. (Like $60.) It's not as convenient but it sounds like it would be a lot more appropriate and savings would more than compensate for the inconvenience.

Thanks again,

Brian

Re: 3-D Design course question

#5

Thanks John

Brian Hahn in SW Wisconsin

>Thanks John,

As you observed, it is a lot of money and I could get a lot of books and videos for that price. And learning from books is easy for me.

I was planning to go to the symposium, and this is just another very good reason to go.

Thanks again,

Brian

Re: 3-D Design course question

#6

Re: Good Deal

Mark Mandell - Gone Round In Jersey

>Be sure to contact the teacher before you start to discuss what you're interested in and why. You'll be wasting time "learning the nature of clay" in a hand-building section of the class, and will want to get on the wheel as quickly as you can. You don't need to be there making pinch-pot ashtrays, but rather using the wheel and clay as a shortcut to explore and develop control of the design, shape, and texture mix in a medium where you simply put your "failures" back in the pug mill (clay mixer) to reuse. It's fun playin in the mud too! |;-}}}

M

Re: 3-D Design course question

#7

Re: 3-D Design course question

wes bischel

>Brian,

It has been a while since I was in school, but I suspect things have not changed that much. From the description and title, it sounds like a foundation course for design/art. It will cover form, negative space, primary, secondary, tertiary forms etc.

Might I suggest going to the school bookstore to see if there are any books listed for the course and look through them. Also, find out if there is a syllabus for the course and review it. It will give you a clear picture of what the class will cover. But as stated,$600 is a lot of money. What would it cost to audit the class (no credit)?

FWIW,

Wes

Re: 3-D Design course question

#8

Re: Good Deal

Brian Hahn in SW Wisconsin

>Hmmmm...

It's been years and years since I played with mud -- I mean clay. I've got a book on ceramic forms that has some interesting shapes that I'd like to explore.

I hope ceramics isn't as addictive and expensive as woodturning!

Re: 3-D Design course question

#9

Thanks Wes

Brian Hahn in SW Wisconsin

>Sounds like a good excuse for a trip to the University Bookstore on the UW campus in Madison. I haven't been there in a couple of years, so it'll probably take several hours to properly browse everything. (Gotta help the economy, you know!)

I haven't found out what it would cost to audit the course yet. On the other hand, if I wait three years until I'm 60 I won't have to pay tution at all. Nice to take advantage of "your tax dollars at work" occassionally!

Thanks again,

Brian

Re: 3-D Design course question

#10

Is it dustless?

T Daniel

>I may switch to get away from the dust.

TD

Re: 3-D Design course question

#11

Well let's see...

Jorge Castaneda

>Potter's wheel, $1,500.00, miles of shelving, $2,500.00, clay $300.00, glazes $1,500.00, gas kiln $3,500.00... and, and, and...: ))

Go for it!

You have my blessing

Jorge

Re: 3-D Design course question

#12

Re: Is it dustless?

John Lucas

>TD Don't switch to Clay. It's dustier than wood. We always dread doing photography in the Clay Studio. It's much dirtier than the other mediums, even Blacksmithing.

Re: 3-D Design course question

#13

Re: Sculpture Dust?

Mark Mandell - Gone Round In Jersey

>OK TD take your pick

Foundery and quarry dust give you silicosis.

Plastics and casting resins (not to mention fillers and pigments) can be highly toxic in raw form.

Vaporized steel and other metal vapors from welding will do you in nicely and early.

Then bact to the potter's studio . . .

Different clays can be bad, but won't get close to the toxicity of many glaze chemicals that include lovely stuff like cadmium and cobalt for a few.

Keep your hands in cool/wet clay for 5-6 hours a day for 30 years and don't be too amazed at how bad the arthritis gets, not to mention carpal tunnel and rotator cuff injuries.

[stop me when you start to catch on . . . |;-}} ]

Re: 3-D Design course question

#14

Till Death do us part

John Lucas

>Mark Near as I can tell, everything I do is going to kill me sooner or later. Used to be eggs, now they say we need eggs. Then sunlight was going to kill us. Now we need it for vitamin D. Read an article the other day that vitamin D was bad. Think I'll just keep breathing wood. The next study may say we need wood for fiber.

Re: 3-D Design course question

#15

Yup

Mark Mandell - Gone Round In Jersey

>I have C-T in both hands from hand-mixing a few thousand pounds of clay before the shop got a pug mill.

My old sculpture professor died of asbestosis.

It's for sure something's gonna kil each of us 'cause I have it on pretty good authority that nobody gets outta here alive. |;-}}}

Re: 3-D Design course question

#16

Just as I suspected!

Brian Hahn in SW Wisconsin

>

Re: 3-D Design course question

#17

Keith Tompkins

Re: Till Death do us part

Keith Tompkins

>How about auto body guys..the fumes are a er...killer. I did a stretch in the automotive field....worn out friction materials...yummy.