Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

Some Really Nice Tool Rests (pics)

Posts

Some Really Nice Tool Rests (pics)

#1

Some Really Nice Tool Rests (pics)

Bill Grumbine (Kutztown PA)

>Greetings all

It has been a while since I posted any pics of anything, and these beauties just arrived, so I thought I would post some pictures of them.

I have really be enjoying my Vega bowl lathe, but it needed a couple more tool rests to maximize its potential. So, I emailed Randy at monster-wood-tool.com and ordered up a couple of his tool rests.


This is the 12" straight rest. I ordered it with a 4"/8" offset for those occasions when I want that long reach into the bottom of a bowl. The post is 1 1/4" for the Vega and the rest itself is 1" in diameter.


This is the bowl rest. It is fairly close in radius to the BWT curved rest that I have on the Poolewood, but it is a lot heavier at 1" in diameter compared to 3/4".

I haven't had a chance to take them for a spin (so to speak), but they look like they are going to be real nice in use.

Bill

Re: Some Really Nice Tool Rests (pics)

#2

Re: Some Really Nice Tool Rests (pics)

Allen Neighbors

>Bill, they look like they are truly awesome. Which Vega bowl lathe do you have?

AL

Re: Some Really Nice Tool Rests (pics)

#3

Re: Some Really Nice Tool Rests (pics)

Scott Greaves, Blackfoot Idaho

>Hi Bill!

So, do they kind of make these up for you based on your specific needs? Or are they pretty much stock? Could you post a link or contact infor? Thanks!

Scott.

Re: Some Really Nice Tool Rests (pics)

#4

Monster-Wood link.. *LINK*

Gerry in Maryland

>Here ya go Scott,

Hope this helps.

Gerry


Monster-Wood Tool Posts

Re: Some Really Nice Tool Rests (pics)

#5

Re: Some Really Nice Tool Rests (pics)

Bill Grumbine (Kutztown PA)

>Hi guys

Al, I have the 2600, which is pretty much the same thing as the 2400, updated with a new model number to accurately reflect the actual swing of 26" over the ways. I wrote a few posts here and in other places regarding the lathe and my purchase, but I cannot seem to go any further back here in a search than the beginning of October. I will email you some links so that you can read them if you are interested.

Scott, the rests that I bought were more or less stock. The straight one is sort of custom, in that I specified the offset (with Randy's advice). I suspect that if you needed or wanted something really exotic, he could make it for you, but you would do best to ask him.

Gerry, thanks for posting the link.

Bill