Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Portable Sawmill & Tree Service – Abingdon, VA

Am I the only one?

Posts

Am I the only one?

#1

Am I the only one?

Mark Kauder, Phenix City, AL

>I was final sanding a small segmented enclosed bowl this morning. It has a small opening, just big enough to put my middle finger through up to the second knuckle. But there was a rough spot just at the very end of my reach. The bowl was ready to part off - only about a 3/4" tenon left to part off, so using a swan neck scraper would be dangerous, no matter what speed, and catch would snap it off.

What to do. No one in the gallery would care, but if another turner picked it up and gave it "the finger"....

I could not put on my sanding glove with the velcro on the fingers and sand it off, the hole was not big enough.

So, I cut a small piece of 150 grit sand paper, and super glued it to the tip of my finger. Worked like a charm......

I guess I could have put on a thin rubber glove and glued it to that but I did not think of that until now.

Oh, Well.....another turning tip I will NOT send in to the tips column of any of the magazines.

Mark

Re: Am I the only one?

#2

Could Be

Barry Irby

>I have never super glued sand paper to my fingers, intentionally, but at least now I have an excuse.

Re: Am I the only one?

#3

PS, John Jordan said.....

Barry Irby

>at a turning demo that he never saw anyone who bought a turning stick their finger in and the people who stick their finger in them never buy them. He had some we could finger and some we could not touch.

Re: Am I the only one?

#4

Re: Am I the only one?

RussFairfield

>Mark,

It is those little things that show you really care. They are the difference between a true craftsman, and just another wood hacker. There used to be an add about, "Caring enough to do your very best." That is what you are doing.

No, you are not alone; and yes, there will be those people who do feel inside the hole. You are doing it for them, and they do appreciate your taking that extra step. It may not bring a higher price, but it will make yours sell ahead of those who don't.

Re: Am I the only one?

#5

Re: Am I the only one?

Wally Dickerman in Arizona

>I agree with Russ. If you can get your finger inside one of my vessels you'll find it to be very smooth. Go to a stationery store and for about 35 cents you can buy a knobby rubber gizmo that fits on your fingertip. Used by file clerks. It works great for holding folded sandpaper when sanding inside a vessel. If your finger is a bit longer than mine you may feel an unsanded spot.

Wally

Re: Am I the only one?

#6

Re: Am I the only one?

Wally Dickerman in Arizona

>Of course if you can't get your finger inside a small opening on one of my pieces, rest assured that it's been sanded to 600 grit, and has at least 4 coats of finish..........)

Wally

Re: Am I the only one?

#7

Re: Am I the only one?

Carole in VA

>Don't want to intentional glue myself with CA, but I cut a small piece of the sticky back hook and loop stuff, stick it to my finger then stick a piece of H&L sandpaper to it. I just wish my fingers were longer.

Re: Am I the only one?

#8

Re: Am I the only one?

Allen Neighbors

>I'm glad you put this comment in here. I don't think I'll try the CA on my finger, but I've learned from you to put some velcro on my sanding gloves... what a novel idea... especially for an old guy that doesn't think of this stuff for himself. :o) Thanks,

AL

Re: Am I the only one?

#9

Don't drink the Kool-Aid!!

Ed Moore

>If it is difficult to get your finger in the hole be VERY careful. Some of the clever suggestions in this thread are really invitations to get a spiral fracture in your finger. If whatever is on your finger grabs the wood then your effort to go the extra mile for your project is nothing but a stupid violation of common sense and you have a spiral fracture to prove it. And spiral fractures are BAD NEWS!

Most of us know not to use steel wool on bare wood because it will grab. Some of the ideas sound as if they might not grab, but some sound like they would in a heartbeat -- especially if there is minimal clearance for the finger.

Ed

Re: Am I the only one?

#10

Re: Am I the only one?

georgetroy

>Mark you could make a sanding flap dowel. Just band saw the end of a 3/8" dowel and super glue your strips of sandpaper. Work your adjustable speed on your drill. I usually have super glue and sawsdust on the end of mine just spreading the ca out, but I don't stick down in the hole on purpose, just by accident. GT

Re: Am I the only one?

#11

Re: Am I the only one?

Bill Crommett

>I haven't had any spiral fractures, but I am constantly getting over sprained knuckles. Must be that I am too old to learn.

Re: Am I the only one?

#12

Re: Am I the only one?

JKJ

>>...and super glued it to the tip of my finger

I haven't tried gluing sandpaper to myself, but I can vouch for gluing cuts. I had a real bleeder last weekend so I glued a piece of paper towel over the cut and hardly missed a beat. The paper peeled off the next day when dampened and the cut was mostly healed.

JKJ

Re: Am I the only one?

#13

Re: Am I the only one?

Walt Drummond, Middlesex, NJ

>Mark,

Your attention to the small details is one of the things that make your work what it is. I salute you. However......

Being a person who still has all ten of my digits, and wants to keep them, I try very hard not to put any one of them inside a form with a small opening whilst it's spinning. Mike Jackofsky showed us at a demo at the club what he does. And the inside of his hollow forms seem smoother than the outside of mine. :)

He cut a piece of rubber floor mat (about 1/2 inch square and about an inch long), rolled a strip of sand paper around it and gripped it with a set of forceps. He had long ones and short ones to fit the current need. I got mine at the last wood show. 2 for $5.00.

Works like a champ and no twisted fingers. The longest pair I have is about 12" long. Fits the deepest goblet I can make.

However you do it, keep up the fantastic work you do. Each new pic you put up is an inspiration to those of us still trying to get there.

Walt

Re: Am I the only one?

#14

Yeah, You're Right......

Wally Dickerman in Arizona

>I've turned and carefully sanded through small openings on so many hundreds of hollow vessels that I must feel it can't happen to me. It can, and possibly will, but I'll just keep on doing it anyway.

Wally

Re: Am I the only one?

#15

Keith Tompkins

Re: Yeah, You're Right......

Keith Tompkins

>sounds like there is a market for a new tool...hmmmmm.

Re: Am I the only one?

#16

Re: Am I the only one?

Mark Kauder, Phenix City, AL

>And I even have some of that in the shop......much smarter.

Mark

Re: Am I the only one?

#17

Re: Am I the only one?

Mark Kauder, Phenix City, AL

>I have used forceps, but could not get to where I needed with them in this case. Make sure if you use forceps, not to put your fingers in the holes in the handle. I worry more about these more because I cannot "Feel" what is going on inside.

Mark

Re: Am I the only one?

#18

Re: Yeah, You're Right......

Mark Kauder, Phenix City, AL

>I appreciate your concern Ed, I do keep the speed very low (200 rpm or less).

Thanks, Mark

Re: Am I the only one?

#19

Re: Am I the only one?

Mark Kauder, Phenix City, AL

>Russ,

That was extraordinarily nice of you to say.

Thanks

Mark

Re: Am I the only one?

#20

Re: Yeah, You're Right......

Ed Moore

>Mark,

Your method seemed less reckless than some others that were mentioned. And of course the size of the opening affects the risk factor, as well as the speed.

Putting anything grabby inside of a hollow form is asking for trouble. And if my waving a red flag makes someone stop and think the situation through, and maybe avoid a fracture or sprain, then it is worth the negative vibes that I may generate in some quarters.

And while I am "here", let me say that I was extremely impressed with the turnings you displayed at OVWG. I appreciated your precision and your eye for detail and form. You do excellent work and you deserve the "positive press" that you have been receiving.

Go Navy! Beat Army!

Ed

(formerly at USNA)

Re: Am I the only one?

#21

Re: Don't drink the Kool-Aid!!

Carole in VA

>Ed, I think about that every time I do it! Like Wally, I know it may get me one day, but I keep on doing it anyway. I keep the speed at 100 and I am hoping that if something catches, the adhesive on the velcro will just give way (it's not wrapped around my finger, but rather stuck to it lengthwise)

Re: Am I the only one?

#22

Ric Taylor

Re: Am I the only one?

Ric Taylor

>One of the original purposes for CA glue when it was developed in the late 60s and early 70s was for medical purposes, similar to what you described. It closed a lot of wounds in Vietnam.

Ric

Re: Am I the only one?

#23

Re: Am I the only one?

JimQ

>Actually the quote was from Hallmark Cards. When you care enought to send the very best.

JimQ