Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

Red Palm Bowl

Posts

Red Palm Bowl

#1

Red Palm Bowl

Jim King

>This is one of those experiments that may or maybe not should have been done. It drew boos and hisses here from the crew here and my wife says it looks like I had a rum nightmare when I thought this one up. I am trying to find a way to turn the hollow palm logs. This time I filled the hollow core with white sticks and poured in fibreglass resin mixed with black sawdust to fill the hollow log. Then added the white ring on top with black pegs for stability. The size is 10 inches in dia. X 12 inches tall. Next time I think it would be better filled with another smaller palm or with sticks of the same palm and resin. The thickness of the wood on a palm does not allow for much turning depth so this was the reasoning behind filling it.


img

Re: Red Palm Bowl

#2

Re: Red Palm Bowl

Barry Irby

>Well, I complement your effort. It was good of you to try. Think of it as an experimental prototype.

I have a few pieces of palm my son brought back from Florida. Very interesting. That perimeter piece is hard and like a bundle of straws, but the center is softer than Styrofoam. I don't have any "rounds". Mine came out of a tree that must have been three feet across. I'm trying to figure out a good use for it. Something segmented I think.

Re: Red Palm Bowl

#3

Re: Red Palm Bowl

Tim Grenville-Cleave

>Not too sure about the white ring, but I like the idea of a smaller palm inside ... then a smaller one again and again all topped off with resin ... well it's only an idea

Just my �0.02p

Re: Red Palm Bowl

#4

Re: Red Palm Bowl

Pat Mulligan

>Nothing ventured,nothing gained.