Maple Bowl
Phil Powell
>This is a pot made from a piece of maple crotch. I inlayed the
rim with silver witch is pretty much a first for me. More to come.
Knowledge You Can Build On — Est. 1998
Maple Bowl
Phil Powell
>This is a pot made from a piece of maple crotch. I inlayed the
rim with silver witch is pretty much a first for me. More to come.
Re: Maple Bowl
JL
>Nice form. Will your finish keep the silver from tarnishing?
Re: Maple Bowl
George Van in WI
>I like it Phil, the silver creates the illusion of a collar to my eyes. I will be anxious to hear how you did it. Do you have a lower profile shot of the pot? Dimensions?
Re: Maple Bowl
Phil Powell
>The piece is about 9 inches accross and about 5 inches high. The inlay
is silver wire CA glued into a slot made with a narrow parting tool. I never
thought about the silver tarnishing....I guess it could but then I would
just have a different color on the inlay. Here's another view. I wanted
the pot to float. I think it does.
Re: Maple Bowl
George Van in WI
>Thanks Phill, it's a floater!
Re: Maple Bowl
GaryG in MD
>Very impressive Phil. I love it. ...Gary
Re: Maple Bowl
joaz
>I have been wanting to do silver wire on turning for years but could not figure out what to do about the seam where the ends of the wire come together. How did you do it??
This piece is gorgeous!!
thanks Joaz
Re: Maple Bowl
Phil Powell
>Joaz,
Thanks for the kind words! All I did to finish the rings was to file a long
bevel on each of the coresponding ends. When I clamped the silver into
the slot the ends overlaped some and CA glue in the slot and between
the two beveled ends captured everything quite nicely. This was a first
try as I'm a fairly new turner. I have several other ideas including other
metals. One at a time.