Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

Young Turners

Posts

Young Turners

#1

Young Turners

Steve in NC

>After 40 years of working wood on the flat side, I finally purchased a lathe 18 months ago. I now regret waiting so long. Most of my traditional shop tools are now use for specific home improvment projects. One of the down sides of this switch to turning is that it is more solitary than cabinet work and therefore my 11 year old daughter, who has been "assisting" for years, has not been as involved.

Based on the advice of the kind folks in this forum, I decided that with the proper precautions, that this would be a good time to have my daughter start to turn. I purchased a Jet mini, (Christmas present to myself) and gave my daughter a face shield, dust mask and Bonnie Klein's book for Christmas. Her reaction was priceless. We are now building a stand for the Jet and hope to have her turning this weekend.

My hope is that my daughter and I will bond with this common interest and grow our skills together until at some point I expect our roles will reverese and she will become the teacher.

It was fun to see several recent posts from at least two other 12 year olds who were starting to turn, (although I was quite concerned for security reasons about a 12 year old requesting wood). Is there any way we could give youg turners a place to exchange ideas and experiences and results of their work? I am concerned about Internet security esspecially for young folks so I think some guidlines would be necessary.

I am just putting this out there for ideas. This could be something as simple as a standard phrase (such as "YT") as part of the subject line that could be searched on by the kids.

This site has been a great find. I thank you all for you advice and thoughts. Happy New Year to all.

Re: Young Turners

#2

Re: Young Turners

Mac

>Steve, The AAW has been encouraging youth participation in their symposiums lately. They have been setting up areas where people such as Bonnie Klein work with the kids when they are not doing demos. I hear that it is going really well.You might want to check the AAW site to see if they have anything new on this posted. The site, in case you havent been there yet is:www.woodturner.org....

Re: Young Turners

#3

Envious Dad

Michael Stadulis, in rainy Gloucester County, NJ

>Hi Steve,

I am envious of you and all the the fathers on this board that are lucky enough to have their daughters take an interest in any sort of WW that they do. You don't realize how lucky you are. My daughter always watched a bit, but I never pushed her as she had other interests, and I made up my mind that I'd let her choose. Happily she did (at least)choose fishing and she's really good at it.

Who knows.....maybe someday she'll eventually catch the bug, but in the meantime, she and her Mom will likely just continue to kid me as they tell each other that......."Dad's going to another WW show"......or Dad's hoarding wood again". ;o)

Happy New Year to you and yours,

Mike

Re: Young Turners

#4

Re: Young Turners

Barry Irby

>I share your joy. My son started to turn when he was about twelve. I taught him what I could and got him books and videos. I highly recommend them. I have posted before about what an advantage they have over us old dogs. When I came along, I bought a Sears lathe and had the book that came with it. To be able to learn from you and Bill Grumbine and Bonnie, And David Ellsworth, and Richard Raffin, Wow!, and to do it without all the bad habits I taught myself. With any luck at all, she will be better than both of us soon and you should be proud. I like your idea of a young turners web site. Get her going on form and design early. BTW, Be prepared. You may need a lot more wood. My son was turning like a maniac for a while and it was all I could do to haul in enough wood and prep the blanks. The joke got to be that he worked in the shop and I worked on the shop.

Re: Young Turners

#5

Steven Antonucci

My kids in my shop...

steve antonucci

>My son (7) and daughter (4) come out to the shop once in a while. While neither is particularly interested in turning yet, both of them have an interest in "working in the garage with Daddy".

I think it's important to let kids find their own interests when it comes to shop time. My son likes to make "cuts" with my old pullsaw blades, and I let him rip scraps of 2x4. Once he understood how to saw, I took the opportunity to explain "how wood is"- long grain vs. cross grain, rings in the trees, difference between oak and cherry, etc...

When you have two kids, there is a natural competition between them. My daughter wants to do what her brother is doing, but she's only 4, so I had to find an activity for her too. Solution: she files 2x4 with an old bastard file. Both make sawdust safely, and get to start appreciating HOW things are made.

Kids are like sponges. They will absorb whatever you put into them. If you allow them to pick the direction, they will ask for more vs. you having to offer it.

The best thing in all of this? Both of my kids fight over the brooms- they want to sweep! Priceless.

Steve

Re: Young Turners

#6

Re: My kids in my shop...

Lan Brady

>The above post by Michael describes my family so well that I must have wrote it!

Actually my kids refer to our wood turning club(PTWA) as "Dads Tree Hugging Cult".

So everyone of you that has a child involved in your wood working hobby should go thank them for their time and keep supplying all the wood they can use.

Happy New Year, Lan

Re: Young Turners

#7

Re: Young Turners

Blake Washburn

>Steve,

I saw your message about young turners, and I want everybody to know that I was not going to post my address on a puplic website. I'm alot brighter than that. In the message I sent, I failed to mention that. Any way.... back to topic. I can access a free website publisher and create a website for us younger turners. I could have a rule about annonymus names to keep there identity hidden. If they break the rule, they will be booted out.

12 year old turner

Re: Young Turners

#8

Re: Young Turners

Steve in NC

>Blake

It sounds like you are a very responsible young man and I appreciate your response. Please understand that as a parent, I worry about the Internet and the dangers it presents esspecially for young folks.

Your offer to set up a web site is interesting. Lets see what the folks here on the forum think. We may be able to do something as simple as putting a tag in the message line that young turners can search on.

I look forward to seeing a picture of your work. I will encourage my daughter to do the same.

Re: Young Turners

#9

Tree-Huggers, Hah!

Jay in TX

>Conservationist, definitely... but all the screams of the fallen under the high pitched growl of my chainsaw mark me as a wanted man in the woods...

Jay Kilpatrick (tmDS) looking nervously at the trees in Saginaw, Tx