Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

Mandrone Lace Burl and the alcohol method

Posts

Mandrone Lace Burl and the alcohol method

#1

Mandrone Lace Burl and the alcohol method

Jeff Theil

>I posted a question on drying mandrone lace burl a few months ago and it seemed the best way to dry wood in general, quickly was to use the alcohol method. Some of you had problems with drying mandrone lace burl. Well I think I solved that problem, even though I think I went to extremes. I rough turned it to about 5/8" to 3/4" thick and then soaked it in EZ denatured alcohol for a week, then wrapped the bottom in a paper bag and left it for a month (even though is was very hard to wait that long). It has been about a month since I finish it and it has not moved. It is 8 5/8" across and 1 5/8" tall with a tung oil finish. Please comment.


img

Re: Mandrone Lace Burl and the alcohol method

#2

another view 

Jeff Theil

>


img

Re: Mandrone Lace Burl and the alcohol method

#3

bottom 

Jeff Theil

>


img

Re: Mandrone Lace Burl and the alcohol method

#4

Nice looking bowl.

Dave Smith, Longview, WA

>Hi Jeff,

I do think you went a little further than you had to with the soaking but who can argue with your results. A very nice looking piece of madrona.

Would it be OK to put the pictures and the message on my woodnheart blog page? I have a post of turner feedback using the alcohol drying process.

Dave Smith

Listening to the rain on the cloud light window in Longview, WA.

Re: Mandrone Lace Burl and the alcohol method

#5

JL

Re: Mandrone Lace Burl and the alcohol method

JL

>The second picture is in the best focus. Beautiful piece of wood. Maybe the joining of the sides and the bottom is too acute? Perhaps a less abrupt transition? My $0.02.

Re: Mandrone Lace Burl and the alcohol method

#6

Re: bottom

ken chase

>Jeff:

I alcohol soak also. I weigh the piece regularly and when the weight stays the same I consider it ready. Have you tried this? Also. How did you determine the need to soak that long. At most I have soaked two days and really don't have an explanation why.

Thanks....nice work

Re: Mandrone Lace Burl and the alcohol method

#7

Re: bottom

Jeff Theil

>Ken,

When I asked about how to dry the burl on WC, someone had said that they soaked one for 24-48 hrs and it still moved on them. And since I was told that you can't really soak it for too long, I decided to goto extremes.

I haven't weighed my bowls as they dry, mainly because I don't have a scale to weigh them, but so far I haven't really had the need to weigh them either. I'm one of those guys who turns when I can, I also have to work 50-60 hrs a week to make a living, but I do get better with each turning.

Thanks,

Jeff Theil

Re: Mandrone Lace Burl and the alcohol method

#8

Re: Nice looking bowl.

Jeff Theil

>Dave,

Yes you can put the pictures and the message on your woodnheart blog page. I just would like to know how I see this page?

And yes I knew I went to extremes but I didn't want to loose the bowl and since someone else had problems with that type of wood I wanted to make sure it worked.

Thank you,

Jeff Theil

Re: Mandrone Lace Burl and the alcohol method

#9

Re: another view

Carole in VA

>That's a pretty piece of wood, Jeff and a unique form. I like the bead and the quick but smooth transition from lip to vertical side. Did you buff it or rub it out? Looks like you may have a little bit of finish buildup in the sharp transition between the sidewall and the bottom, but that could be the flash.

Re: Mandrone Lace Burl and the alcohol method

#10

Re: another view

Jeff Theil

>I actually just realized that I forgot to say that I used teak oil first then tung oil. I haven't done anything to the finish that you see. The tung oil is high gloss so the buildup that you see is just the transition and the shine.

Thank you,

Jeff Theil

Re: Mandrone Lace Burl and the alcohol method

#11

Thanks Jeff *LINK*

Dave Smith, Longview, WA

>You can find the blog in the upper left corner of my web page(link below.) It will be on the alcohol soaking blog.

Dave Smith

We are getting too much rain in Longview, WA.


Wood n Heart web page.