Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Have a question? Ask Woody!

Seeking scraper & parting tool insight

Posts

Seeking scraper & parting tool insight

#1

Seeking scraper & parting tool insight

Lou Krupnick

>Thanks in advance for all comments.I'm looking for suggestions regarding the purchase of a square nosed scraper & a parting tool for med sized faceplate work. Commentary and recommendations appreciated. thanks, Lou

Re: Seeking scraper & parting tool insight

#2

Re: Seeking scraper & parting tool insight

Russell L. Babbitt Jr.

>Square nose scrapers are all basically the same. Depending on how much you want to spend and what metal is used. Scrapers a easy and fast to sharpen so I usually go with the less expensive metals and for gouges I may spend more and get better metals that stay sharp longer. There are at least four types of parting tools. Standard, diamond, fluted, and thin. They generally work the same way. The fluted and thin are somewhat special. For spindle work the diamond parting tool is less prone to catching. For faceplate turning, such as the tenon on the foot of a bowl I would use either the standard or diamond parting tools....I hope I am safe is saying, the parting tool is generally not considered a faceplate tool.

Re: Seeking scraper & parting tool insight

#3

Re: Seeking scraper & parting tool insight

GaryG in MD

>Lou, You probably have a very good reason for wanting a square-nosed scraper, but FWIW, let me say that I rarely use mine, but I have a one-inch round-nosed scraper that I use a lot -- at times when I'm not comfortable with a gouge. I got the HSS Benjamin's Best (China) for under $20, and it is a very useful tool. It is plenty heavy enough (for my needs), and has a nice long handle. Can't ask for more at twice the price. I even get curls off it.

You can never have too many tools. ;-) ...Gary