Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

Deacon R.I.P. and his urn

Posts

Deacon R.I.P. and his urn

#1

Deacon R.I.P. and his urn

Ed Moore

>A good friend from church had a Yorkshire terrior, named Deacon, which died after a long illness. He asked me to make a box to hold Deacon's ashes and I am sure that he envisioned a simple flat box. When I finally settled on what I wanted to do I chose my best piece of ambrosia maple and turned the threaded box shown below. It is 6 1/4" tall and has Deacon's name and dates on the other side. The friend offered to pay for the box, but I choose to give it to him at church tomorrow as a gift.

Several points:

1. I printed what I wanted using my laser printer and traced the lettering on the box. Despite using two pieces of tape to secure the paper and tracing paper I have concluded that it slipped or bowed up due to the contour of the side. The lettering is not good enough for me to show you -- and I am burning because my pyrography did not turn out better. I quit with the lettering and did not dare attempt a drawing of Deacon.

2. I think there is a real market for pet urns. Because I am too tenderhearted about pets I choose not to make them, but there is an opportunity here that could be quite profitable.

3. I have found a different way of calculating for threads that I think is easier than any method I have seen written up. It is based on what I found in Fred Holder's book. The Best Wood Tools threading device worked extremely well.

And the Merriest of Christmases to you all,

Ed Moore


img

Re: Deacon R.I.P. and his urn

#2

Beautiful!

Jim K in Trappe PA

>

Re: Deacon R.I.P. and his urn

#3

Re: Deacon R.I.P. and his urn

Jim King

>A very nice thing to do.

Re: Deacon R.I.P. and his urn

#4

Re: Deacon R.I.P. and his urn

Eddie Pacheco; San Jose, Ca.

>Ed, nothing you could have done wrong with either a laser or pyrography would have ruined the beauty and kindhearted intent of that box. You did a wonderful job.

Merry Christmas to you as well.

Re: Deacon R.I.P. and his urn

#5

Re: Deacon R.I.P. and his urn

John Lucas

>Ed Good job. You are right, there is a market but rather than sell them our club makes urns and donates them to a local group that rescues animals. They sell them to raise money for thier organization. We kind of let it lapse a little this year so I need to do a demo on making urns so we can get the new members involved in this and maybe the rest of us will start making them again.