Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

Christmas Projects...

Posts

Christmas Projects...

#1

Christmas Projects...

DWR

>This is a follow-up to the 12" saga from the main message board.

Here are the spindles that were cut on the modified jig, rather than swapping in a 12" blade.

I still need to finish machining the bases and tops, but one is done and the rest will be finished tomorrow.

They will hold both a pillar and a taper candle... Each is turned a little differently and the tops and bases are Walnut, Cherry and Curly Maple. The spindles are European Beech.

Thanks for all the advise from the main board...

Dave


img