Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

Epoxy Play

Posts

Epoxy Play

#1

Epoxy Play

Bob Edwards

>This is a piece of ash that had gotten rather punky(sp). The red hart shape was a worm hole. I colored the hole with felt tip marker and filled with clear epoxy. I thinned the extra epoxy with acetone and coated the inside of the box and the lid. I am always looking for a water proof finish. This may be it. The lid is a piece of Corian.


img

Re: Epoxy Play

#2

Re: Epoxy Play

ken chase

>I have often wondered if epoxy could be thinned out and applied like a finish. What kind of epoxy did you use? The kind in a cylinder you get at the hardware store or a two part to be measured then mixed?

Did you use a brush to apply? Was it smooth or did you have to sand afterward?

Thanks

Re: Epoxy Play

#3

Re: Epoxy Play

Bob Edwards

>Ken, I applied it with my finger in a rubber glove. There was a bit of open, punky grain on the inside and I wanted to work it into the wood as much as possible. It dryed clear and shinny. No sanding required. It was a two part 15 minute epoxy and took over 24 hours to dry hard.