Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Have a question? Ask Woody!

Pricing revisited

Posts

Pricing revisited

#1

Pricing revisited

John Lucas

>I read with much interest anything I can on pricing work. The thread below was very interesting and I take all of that into consideration when pricing my work. There is one more very major thing to consider. Location, location, location. I've been selling here in Middle Tennessee for quite a few years now and you have to compress the size pricing considerably. Although it takes a great deal more work, equipement, finish, sandpaper etc. to make a 20" bowl than a 12" bowl, around here you can't get much more money. $300 is max and that better be a very special piece of wood. Most bowls will sell fairly quicly in the $40 to $70 range but if you get over that be prepared to sit on it awhile.

Segmented turnings are the same with a little higher price. I quit making them because $200 was about the max I could get and it simply wasn't worth the time spent.

100 miles away in Nashvile and Knoxville you can approximately double the price but I have a good friend who switched from very well done segmented work back to regular wood because the money just wasn't there.

I see TD and Mike Swing sell bowls and vessels for $1000. They won't sell around here. A Large John Jordan piece sat in our local gallery for a year priced at $900. It never sold. Another similar vessel by another artist was priced at $500 and never sold.

Anyway what I'm trying to say is in some parts of the country you simply won't get the prices that we see on this forum. You'll find this true if you travel the craft shows. Some shows will easily sell high dollar pieces and some shows won't. You have to gear your inventory accordingly. This is according to the artists I photograph for since I don't travel myself.

My question is, to those who do travel widely, do you vary your prices? I wouldn't think this would be a good idea. You wouldn't want any previous customers to find out your prices vary but at the same time I'm sure the same piece that sold for $200 in Tennessee would sell for $700 in someshows in Florida.

Re: Pricing revisited

#2

Re: Pricing revisited

Mike Schwing from Md.

>I don't sell enough $1000 bowls to pay the bills John, and can count them on one hand. My zanier work brings a whole lot more money than my bowl work for sure, but it of course takes more time and I have been fortunate enough to have developed a collector interest in that sort of my work.

You are of course completely correct in that it is location, location, location as far as gallery sales.

I was cautioned by one of my "mentors" to avoid the moniker of "local artist" so I don't do any gallery sales in my regional geographic area. Also one of the reasons I don't do local crafts shows. Nothing wrong with them, but I can't get the prices I want at local crafts shows anyway. (ACC show excepted, but I'm not there)

I don't travel with my wares, but I have chosen galleries pretty carefully in Maine and California, both very far away from where I create my work. I have my eyes on some high dollar summer tourist town shops/galleries, but that'll have to be put on hold till next season.

I look forward to hearing from some of the other folks here who sell their work widely.

Re: Pricing revisited

#3

Grow your own market

TD

>John, anywhere that there are doctors, lawyers, business owners, etc. there is a market for high dollar work. It is essential to know that these people want high quality work and they are willing to pay for it. It is also essential to know that these people willing to pay these amounts know what they are looking at. They know form, they know a good finish (a surprising number of them know the difference between an oil finish and a poly), they see sanding marks, they see the dimple in the bottom of the bowl and they know it isn't supposed to be there, etc. To tap this market you, individually or as a club, have to promote, promote, promote. You have to do demos at festivals, you have to set up displays in the lobbies of banks and hospitals, you have to do demos at schools. All this raises an interest in turned art. Without this interest being cultivated the prices will not be there. The people who buy the expensive pieces love it when someone walks into their house or office and sees a piece and explain "that is a (your name____) bowl". This is why a recognizable style is needed. No one should believe that selling is easy or that marketting doesn't work. You must push your product if you want it to sell.

TD

Re: Pricing revisited

#4

Re: Pricing revisited

Joel Hunnicutt

>Good post John. I have spent the last year trying to establish a "national" market and my pricing has be adjusted accordingly. One of the problems is that the work is now priced out of the range of people that I know locally that want to buy the work. I finally decided that I would offer work to these folks at my "interior designer" pricing which is half way between my wholesale and retial prices. I don't have any local galleries, so that seems to work out OK.

One of the issues with pricing I think is one of context. When people see a $1000 piece sitting next to a $50 piece it seems outrageous, but when that same piece is displayed near $2000 blown glass and ceramics the pirce is much more in line.

Re: Pricing revisited

#5

Keith Tompkins

Re: Pricing revisited

Keith Tompkins

>Hi John, you can't really vary your prices, it will come back to you eventually, not in a good way.

Re: Pricing revisited

#6

Keith Tompkins

Re: Grow your own market

Keith Tompkins

>Terry, you raise many important points....Yes, the buyers of quality merchandise are educated... and have refined tastes...They have studied the field of turning before making purchases, and know the names to invest in, and the names of those "to watch".

Many rely on the expertise of a well known gallery to help with the buying decisions, including major collectors and museums.

This is just one reason why name recognition is important. It's not enough to just make pieces and accept a few occasional sales. It takes a tremendous effort to break into turning, especially if you want to sell your work at the upper levels of our craft.

A serious buyer won't buy mediocre pieces...they've learned to invest only in high-quality work, and would rather spend thousands on one good piece than purchase many mediocre ones. Most collectors look at their pieces as INVESTMENTS. The good ones are sure to appreciate in value.

To me, it all comes back to investing the time to do things right. I know turners who boast of making hundreds of bowls a year. I think they'd be better off making just one totally awesome piece. Also, you can't achieve sales success with out understanding good design...there are too many good turners out there who are competing for the same customers. ...not to mention all the other craft and art media.

It's not easy promoting yourself...it requires putting yourself on the line, having your work judged against the rest of the turners who are attempting the same thing. It means far too much time away from home and family. Sometimes it seems the failures and rejections far outweigh the success stories...but it's got to be done. I think the rewards are worth the effort.

If you do the groundwork, establish yourself in the turning community, learn all you can about form, and strive for excellence, then promote yourself, the sales will take care of themselves.

Re: Pricing revisited

#7

Right on!

TD

>Keith, you are correct; many buyers are investors. They expect your prices to increase. I have one buyer right now who is buying every piece she can afford because she thinks my work will appreciate quickly. Once someone such as this "invests" in you they will promote you so that their pieces will appreciate in value. I am just now turning this corner, (I think). It has taken about 13 years of constant turning, promoting, and selling to get here and I still have a ways to go. This follows many years of just turning when I needed something like a table leg or fruit bowl. It isn't quick and easy. It is easier for a club to promote turning in an area than for an individual to do it alone. Interest has to be raised, that is foremost. Once potential buyers are interested they will educate themselves on the good and bad points of the art form. They ask questions, then they go to someone else who sells turnings and they ask questions there, and so on. Soon they know what is good and what is not. Many also collect pottery or glass or other art forms and they already know about good form, even thickness, flowing curves, etc. The bottom line though is "create an interest in turning in your area". If no one has done this before you then you must do it yourself, then when you have the market started you will have to keep improving to stay ahead of the pack that will assuredly be riding your coattail. At some point it may be better to work through a good gallery but I do not think that is the place to start. Too many of us expect the gallery to give us a name; I think we whould go to the gallery with a name already established. There is no magic; just promote, promote, promote.

TD