Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Price drop on over 1300 Rockler items

Re: Dawn Adam's question on the Finishing Thread

Posts

Re: Dawn Adam's question on the Finishing Thread

#1

Re: Dawn Adam's question on the Finishing Thread

Dinyar Chavda

>Dawn:

I just saw your question re Russ' viedo/DVD, and I wanted to ensure that you saw this response, which is why I created a separate thread.

I cannot say enough good things about Russ' video. I had been bugging him for a long time to do it, for purely selfish reasons---I came directly to turning, with no experience in woodworking. So, unlike a lot of the folks here, finishing was a giant mystery to me. I read other books on finishing, but they were about the flatworld. Plus, I really like to learn from videos, because you can see the process, and the process was more than half the problem for me. The only finishing turning video was the one by Chris Stott, which is good, but he covers a lot more than finishing in it.

Russ' 3 volume set can seem to be a bit repetitive at times to someone who is more knowledgeable than I am (sorry, Russ), but, IMO, it really isn't if you listen to it carefully. For a person like me, understanding what to do, and why to do it, and watching Russ actually do it has helped my finishing immeasureably. It's currently taking longer to do my finishing, as I am trying out different things, but the end result is already wonderful, and I am really enjoying it.

If you have any questions about finishing, this is the video to get--remember, it starts with sanding, and then talks about various kinds of finishes, their plusses and minuses, and what to use under which circumstances. Plus he shows alternative ways of applying the finishes. Finally, he gives his formulae for certain commercial products, which have already saved me a bundle (which warms me right down to the cockles of my heart!)

Finally, Russ has a trait that I truly appreciate. He distinguishes between fact (based on theory and experimentation) from opinion, so that you know when you can "play" with things, and when he's already done the experimentation, and found the best way. By the way, when Russ says that something is the way to do it, he does so in a manner that leaves no doubt as to his meaning!

You refer to it as his video, but understand that it consists of 3 tapes, for a total of 6 hours!

In my opinion, and as others have said, this should be one of the videos in every turner's library.

I know this sounds like an unabashed ad, but, hey, that's the way I see it.

Dinyar

Re: Re: Dawn Adam's question on the Finishing Thread

#2

Re: Dawn Adam's question on the Finishing Thread

Dawn Adams

>Thanks so much! This sounds like something that I should make sure is under my Christmas tree (and least ordered by then) even if I give it to myself. Being new to woodworking like you were, I also have no previous knowledge of finishing. I look forward to learning from this series of DVD's. I'll let you know what I think once I watch them. Thanks again for your opinion.

Dawn Adams

Re: Re: Dawn Adam's question on the Finishing Thread

#3

2:30 am--4:30am? Don't you people sleep?.....

TD

>I second the nod for Russ' videos. I had experimented for years with oils and it was hit and miss; I am still experimenting but now I feel like I know a little more about what I am doing.

TD

Re: Re: Dawn Adam's question on the Finishing Thread

#4

Re: Dawn Adam's question on the Finishing Thread

Ruth NIles

>Hey Dinyar, how are you? I miss you!

Ok, back to the subject, Russ's finishing videos are like watching the best and most complete book on finishing. Everyone of all skill levels should own this set, it's the "dictionary of finishing". Also I love what TD said about it, which is the truth, "If what you need to know about finishing isn't there, you don't need to know it".

I am not being paid to say any of this. Actually I don't get paid to say anything! : )

Happy Holidays all,

Ruth

Re: Re: Dawn Adam's question on the Finishing Thread

#5

Re: Dawn Adam's question on the Finishing Thread

George Van in WI

>Considering the thousands of dollars invested in a lathe, tools, etc., Russ� no nonsense video seems a small price to learn about the various processes to make our product complete and pleasing. It is not just one way to �skin a cat" (no offense to cat owners�.used to have one myself) video. My only regret was I wish I had waited for the DVD to come out which is now available and will help to browse different parts of the information.

Re: Re: Dawn Adam's question on the Finishing Thread

#6

Re: Dawn Adam's question on the Finishing Thread

CC

>Where can one purchase this finfshing video?

Re: Re: Dawn Adam's question on the Finishing Thread

#7

Re: Dawn Adam's question on the Finishing Thread *LINK*

George Van in WI

>Here it is.


Russ' Video

Re: Re: Dawn Adam's question on the Finishing Thread

#8

Merry Christmas to me

Dawn Adams

>Just ordered the video - and yes, I am always up at 4AM, but I never can make it to the 9PM chats.

Re: Re: Dawn Adam's question on the Finishing Thread

#9

Re: Merry Christmas to me

Dinyar Chavda

>Dawn:

You mean you had already gone to bed and woken up? Wow!

D

Re: Re: Dawn Adam's question on the Finishing Thread

#10

I Love That Quote!

Barbara Gill, Remlik VA

>"I am not being paid to say any of this. Actually I don't get paid to say anything! : )" Ruth Niles

Mind if I borrow it for a little while?

Re: Re: Dawn Adam's question on the Finishing Thread

#11

Me too! :)

TD

>

Re: Re: Dawn Adam's question on the Finishing Thread

#12

I get paid to shut up or at least be quiet

John Lucas

>

Re: Re: Dawn Adam's question on the Finishing Thread

#13

George, Thanks for the link

cc

>