Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

TiGer2000 sharpening system?

Posts

TiGer2000 sharpening system?

#1

TiGer2000 sharpening system?

Philip Berman, Montville NJ

>Hi -

Has anyone used the TiGer2000 Sharpening system? It appears to be very similar to the Tormek, although somewhat cheaper in price. It's available at www.toolcenter.com.

Thanks for sharing any experiences you may have had.

Re: TiGer2000 sharpening system?

#2

JL

Re: TiGer2000 sharpening system?

JL

>Looks very like a Tormek (similar jigs also). Smaller wheel though. Maybe by the time you add in the cost of a Tormek 10" wheel, it would be closer in price.

Re: TiGer2000 sharpening system?

#3

Re: TiGer2000 sharpening system?

RK in Milw

>The TiGer system doesn't have the range of jig available that the Tormek does. Take a look at the jig for gouges. You can't do a fingernail grind and the jig will not work with smaller gouges. There is no jig for skew chisels. The angle finder doesn't compensate for changes in the wheel diameter like the Tormek.

I guess you get what you pay for. Hope this helps.

Re: TiGer2000 sharpening system?

#4

Re: TiGer2000 sharpening system?

Dave Thompson - Champaign IL

>It and other power sharpening systems are covered in this months FWW magazine (Feb 06 issue #182). It compares the TiGer and the Tormek and points out that the TiGer wheel is smaller (8"), and "the finest grind achieved with the TiGer is coarser than that of the Tormek. So you'll spend more time at the leather honing wheel removing the deep scratches left by grinding."

enjoy,

Dave

Re: TiGer2000 sharpening system?

#5

Re: TiGer2000 sharpening system?

Tom Thomas

>I was at the Arlington Texas Woodworking show two weekends ago. I looked at the Tormek at the show and talked to Jeff Farris and his wife. Then I went across town and looked at the TiGer2000 system and tried it. I went back to the show and bought the Tormek with just the right jigs for what I need to do. I feel that the quality and accessory selection for the Tormek and the support of Sharptools USA was a better deal for what I wanted and needed. The TiGer2000 will sharpen tools well and will probably be servicable for a long while, but I think the small percentage price difference did not over shadow the overall value that Tormek offers.