Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

Blessing brush

Posts

Blessing brush

#1

Blessing brush

Basil Biberdorf

>As an Orthodox priest, I need a blessing brush for throwing and sprinkling holy water: when blessing people, icons, church implements, and (mostly during the Theophany season) homes. I couldn't find one with stiff bristles (my preference, as opposed to horsehair or nylon) commercially, so I made one myself. The pictures here are of my second effort, which is a gift for a newly-ordained priest friend of mine.

The wood was from a free burl cut-off I've had for two years, not knowing what I could do with it. I see it spalted just a bit along the way. The bristles are corn straws, as are used in a typical broom (I'd like to use a darker, rattan-type fiber, but I couldn't find any fine enough). They are held in the handle with off-the-shelf epoxy bought at a department store. (The local Woodwright didn't carry System-3; too expensive to mail order it.)

Comments and critique are appreciated.


img

Re: Blessing brush

#2

Blessing brush Picture 2 

Basil Biberdorf

>


img

Re: Blessing brush

#3

Blessing brush Picture 3 

Basil Biberdorf

>


img

Re: Blessing brush

#4

Re: Blessing brush Picture 3

David Breth

>This is a terrific application of a lot of things for lathe work. For one, it justifies all of use keeping those little scraps off nifty wood you don't know quite what to do with. For another, you had the undeniable fun of devising a solution for yourself in using the straw and in selecting the glue you thought would work best. It is a gift for a friend, which I enjoy making endlessly (all the fun of making the item without the space getting consumed in your domicile!), and lastly, making a practicle item that will be held in the hand and enjoyed for many, many years. Hard to ask for much more out of a small piece of wood.

Oh - and yes, I think it looks just great to boot!

David B.

Re: Blessing brush

#5

JL

Re: Blessing brush

JL

>Nice piece. Couple of questions though. You embedded the broom corn directly in the piece w/o any secondary fitment? Does the broom corn handle the moisture well?

Re: Blessing brush

#6

Re: Blessing brush

Basil Biberdorf

>Yes, I embedded the straws directly into the handle. My (limited) experience with other brushes is that this is somewhat typical for straw/rattan ones. As for the moisture, time will tell. I've never noticed a broom having long term problems after being wet at the tips. A blessing brush is typically used by dipping the tips (not more than the outermost inch or so) into the water and then sharply flinging the water out of the brush. This means that the bristles are simply damp rather than sopping wet when done. I'd certainly let it dry out, but I'd do that for any brush of this sort.

Re: Blessing brush

#7

Re: Blessing brush Picture 3

Bryan Jones

>Your brush is wonderful . I am sure it will be used and treasured for years to come . What did you finish it with ? The figure in it reminds me of leather almost . I made a small ratton wisk for my wife and I used 3M 5200 marine grade adesive , I'm not sure how it will work ( i'm sure she will let me know ) . this would be a great gift for Our parish priest , but I decided to try and make pair of new collection plates ( Im almost done eugene thnx ) . Have a Merry Christmas . .......... Bryan