Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

cartridge filter

Posts

cartridge filter

#1

cartridge filter

Norm Smith in Nova Scotia

>I have a King 2hp. dust collector with a felt bag that leaks dust. I am considering replacing the bag with the 1 micron cartridge filter that House of Tools sells. Does anyone have any expierence with this or another brand od cartridge? If so, please let me know the pros and cons.

Thanks,

Norm

Re: cartridge filter

#2

Re: cartridge filter *LINK*

Kevin Gerstenecker

>Norm, I am not familiar with House of Tools, or the filter you refer to, but here is the link for a place I know can help you. These folks know dust control, and they would probably be very helpful for your filter needs.


Wynn Environmental

Re: cartridge filter

#3

Re: cartridge filter

Vicmarc.fan

>I replaced my bags with a Penn State 1 micron canister filter on top and the clear plastic bags below. Cost is now $195.00 for canister and $21.95 for 10 bags. I had no idea how much this would improve my system. I might add I tried just the canister with a filter bag on the bottom and it didn't work nearly as well as with the plastic bag. It really works too well for the lathe, I suck up a lot of paper towels because they are pulled out of my hands, but I also use it to clean up and does a great job.

Ron

Re: cartridge filter

#4

Re: cartridge filter

Mark Kauder, Phenix City, AL

>I bought a filter conversion system from the now defunct TWC (The Woodworker Choice), at a woodworking show. I replaces a couple of good quality felt filters.

I put the filter on in about 10 minutes, and replaced the bottom filter bag with a plastic bag.

Works great. Occasionally the suction will fall off, and All I have to do is rotate the handle on the filter that knocks the dust off, and I am back in business. Even though the bottom bag provides no filtering, it seems like the suction falls off when it starts to get full.

But all in all, I would recommend the conversion to anyone.

Mark