Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Urban Salvaged Hardwood Slabs, Milled In-House from Rare Trees. Shop Unique Walnut Stock.

Switch problems with Milwaukee drills?

Posts

Switch problems with Milwaukee drills?

#1

Switch problems with Milwaukee drills?

Joel Hunnicutt

>Anybody else have problems with the switch on their drills. I just lost the second one in 2 years. I had kept the old one for parts only it was the same part that went bad. I'm really tempted to go with a cheap knock off if they aren't going to last any longer than this.

Re: Switch problems with Milwaukee drills?

#2

Re: Switch problems with Milwaukee drills?

Ken Langenberger

>I had trouble with a 3/8 variable, picked up a new one at milwaukee tool for $6.00 and fixed it

Re: Switch problems with Milwaukee drills?

#3

Re: Switch problems with Milwaukee drills?

Mark Kauder. Phenix City, AL

>Joel,

Have you figited with the reverse switch?

I dropped mine once, and the trigger switch quit working. So I took it all the way to the Atlanta service center (was in Atlanta anyway), and they plugged it in, played with it, and it turned out the fwd/rev switch was kinda stuck in a middle position, and that caused the trigger to stop working.

I have a knock off as well, but it is very rough sounding, etc, and it is my spare. You can get a rebuilt real one on Ebay for about $69.

Mark

Mark

Re: Switch problems with Milwaukee drills?

#4

Re: Switch problems with Milwaukee drills?

Joel Hunnicutt

>I checked that and it was OK. The switch has been giving me problems for the last couple of weeks and I would blow out the drill and keep going, but tonight it is DOA

Re: Switch problems with Milwaukee drills?

#5

Re: Switch problems with Milwaukee drills?

Gary in Zirconia, NC

>I haven't had a problem with my Milwaukee or Souix switches, but the switches in the knock offs don't last me more than 2 weeks.

Re: Switch problems with Milwaukee drills?

#6

which switch?

tdaniel

>The fwd/rev or the trigger? Does yours have the fwd/rev switch on the rear or on the top? The only switch I have had to fail was from a fall onto the concrete floor; I just got a new switch to put in but haven't done it yet.

TD

Re: Switch problems with Milwaukee drills?

#7

Re: which switch?

Gary in Zirconia, NC

>The switch on my knock offs that went bad have the reverse on top, but it is the trigger switchs that go bad.

Re: Switch problems with Milwaukee drills?

#8

Re: Switch problems with Milwaukee drills?

Darryl Hansen

>Joel is it the switch or the trigger mechanism. There is a push rod that moves the switch internally that sometimes gets out of alignment. Or is it the electrical switch itself that is giving you a problem?

Re: Switch problems with Milwaukee drills?

#9

Re: Switch problems with Milwaukee drills?

DWFII

>Didn't someone post a link for replacement switches? I can't find it. But I have been thinking about getting a knock-off and was relying on the replacement switch to be better than the original.

Anyone who knows where to get a replacement switch...can you post the link or email me?

thanks

DW

In the High Desert of Central Oregon

Re: Switch problems with Milwaukee drills?

#10

Re: which switch?

Joel Hunnicutt

>It is the trigger switch. I open the case and manually pushed in the rod and nothing.

Re: Switch problems with Milwaukee drills?

#11

Re: Switch problems with Milwaukee drills?

WOODNUT358

>Had a problem with my clos quarter drill,but it was still under warranty.Drill would knock off when switch was pressed.

Re: Switch problems with Milwaukee drills?

#12

Re: which switch?

Juergen

>I've been looking for the OLD type trigger switch for over a year. Milwaukee and Souix tell me the design was changed when they put the reversing switch/lever on the top. Now I have a drill with new bearings and no switch. Go figure. If anyone has an old style trigger switch I sure could use one.