We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
>I was trying to do some drawing this morning to work on the details of my next experiment. Why is it that when I draw the left side of a vessel I can get nice clean shapes(these are mostly convex) and when I draw the right side I get really ugly shapes with flat spots etc, (these are mostly concave) Does anyone else have that problem. I guess I can just draw convex better than concave. I wonder if I can draw the right side of the piece better if I use my left hand. Maybe it has the same affliction of only being able to draw convex.
>That is a common occurrence when people draw. Try drawing only the right half, fold the paper in half and cut along the lines.
You could also use a mirror, while the paper is on a table place a mirror upright and at a 90-degree angle so the reflection give the image of both sides.
Get a book called "Drawing With the Right Side of Your Brain" and you'll get all the answers and the solutions. Yes, this is very common and, I think, only trained artists (mechanical, commercial and technical) totally overcome the problem.
I fold the paper in half and trace the nice side I've finished, it's quicker. : )
That is one of the reasons our art teacher insist on us using our whole arm and body, not just the wrist. For the lathe work we need only one side anyway.
>John, I too have a problem with this,folding the paper as stated will work,also I sometimes just flip the paper upside down and draw the right side that way.Seems to work for me.
>My older son has some sort of Dysgraphia. He can't write well. You would be hard pressed to read any of it and it's not for a lack of trying, believe me, if anyone had made me work on my handwriting as hard as he worked on his, there would have been bloodshed. Anyway, he can draw beautifully. The experts on this said the writing and drawing came from different parts of the brain. I wonder why he can't learn to "draw" the letters?
I also wonder why we make something on the lathe and then take it off and stand it up and it looks very different. Does anyone make a lathe that turns the piece in the upright position? Maybe potters have an advantage. Sorry John, it must be Sunday morning.
>Hey John use your computer. Listing a free download of a drawing program called Expression. You can draw, color, and edit your shape. The curved spline tool is great. Print out on 1/4" graph paper. It's not too late to teach an old dog new tricks. The program is free, free, free, free all you need to do is download and sign the MS stuff. Highly recommended. GT
>Hi John, I wish I could convince more people to draw their work before approaching the lathe. It's probably one of the best tools for improving one's work. I fold paper also, and graph paper helps, similar to connecting the dots.
Something I do at my turning classes is "force" students to draw their pieces before approaching the lathe. It accomplishes a few things...it makes the student look at the effects of proportion, and helps visualize what the piece will actually look like when finished. I can look over their shoulder and ask questions about certain details and give suggestions if asked. Someone else mentioned earlier that they have trouble visualizing a piece while on the lathe...it looks different when standing up. Following a drawing solves that problem...measure the height and width of the drawing, transfer to the piece on the lathe. NO surprises.
>As Keith and Ruth both mentioned, folding and tracing is allot easier.
But as Keith also said, some have trouble visualizing a piece while on the lathe. Likewise, some will also have trouble visualizing a two demensional drawing laying flat on a table. By folding and cutting you are now able to "stand" the drawing upright. If you now look at the cut out with "squinty eyes", you will get a better prespective on the shape.
>words and letters come from the left side of the brain and drawing comes from the right side. The book mentioned above will help you understand this and may help your son. Our club is having Betty Edwards give a talk for us in March.
>John I have been slowly teaching myself to draw. I find it similar to learning to turn wood practice, practice, practice. A couple of suggestions warm up first, draw some shapes, use your entire arm not just wrist and fingers. Try drawing the curve without looking at the paper. Something I have done is to draw a shape, trace what is correct about the shape onto another piece of paper, and repeat until you have the form you want. I that Ruth reccomended "Drawing on the right side of your brain" this is a good book. On line consider paying a visit to http://www.wetcanvas.com and visiting the drawing forum.
>John, the easiest way to draw the other side is to use a coloured transparent sheet of plastic. Place it along the center line. You will be able to see the image reflected in it and you will be able to trace that image on the other side. I've used this technique for years when teaching young children how to draw and it works every time. You can buy the plastic in several art stores. Good luck.
I think it is mostly in the mechanics of the physiology. When drawing arcs such as you describe your pencil point can pivot more easily and naturally around the machine made by your hand and finger joints to the right of the line. On the other hand (ha!), drawing a line curved the other way requires a far more complex set of coordinated motions in the fingers and hand. (remotely like trying to coordinate both knobs of an etch-a-sketch) Watch your finger and hand motions while drawing various arcs and see if you notice what I'm trying to say.
Note that this difference is far more pronounced if you draw by moving your fingers but by keeping your arm and shoulder mostly stationary. In art school they teach moving the arm/shoulder/body freely instead of just the hand. This is a bit like the woodturner's dance at the lathe where you move your whole body instead of just your hands and arms! The worst thing you can do is to draw with just the motion of your fingers. The larger motions allow you to draw more fluid lines. If this method is new to you, it is initially harder to control but gets easier with practice. (surprise, surprise) However, even when drawing with my entire arm I find it easier to make arcs in one directon than the other - I assume this is because the piviot points in the elbow and shoulder are still to the right of the line.
For similar reasons, I find it much easier to draw straight lines in some directions than others, directions which simplify the coordinated motions needed. I often turn the paper around to freehand straight lines. This works for curves as well.
Here's a fun trick: hold the edge of a small flat mirror against the paper such that the mirror is perpendicular to the paper. As you draw (or just after you draw one half) you see the line reflected and see both halves at once. The symmetry will be perfect and you don't even have to draw the other side! As a bonus, you can instantly widen or narrow the shape by moving the mirror a bit. If you run a pencil line down the mirror contact edge you can replace it in the exact position later.
You can also tilt the contact axis a bit to REALLY change the shape.
>Wow! I've got to get that book! I spent many a frustrating hour trying to improve my handwriting. I write right-handed with a backwards slant and not because it comes natural. One of my teachers made me learn to write that way. It was an effort to break with my old writing habits and was more successful than anything else we tried. Give me science, or math, or art, No Problem! English, German, French, I got all straight D's, both in high school and in two years of college. I'm not Ronald Reagan! (The Great Communicator) I won�t even start on spelling! Thank God for spell check.
>Forgot another tip - try drawing it upside down/sideways/on the diagonal. Sometimes this is just enough to try up the analytical side of our brains and you come out with a better drawing.
Crazy as it seems try drawing your design upside down. I just finished a drawing class and the problem you are having is right-left brain issues. Don't worry we all have it. So the idea is to trick your brain. In my class we all started out drawing upside down and by the end of class we were able to draw right side up. Reference book: Drawing on the Right Side of the Brain by Betty Edwards. I NEVER could draw people but I was able to copy a piece done by Pablo Picasso by using this technique. Good luck